-
×
Standard Abrasives 863299, Quick Change TR S/C Unitized Wheel, 632, 2 in x 1/4 in, 7010330149
10 × $5.73 -
×
3M 05442, Stikit Soft Hand Block, 2-3/4 x 5 in, 7000045435
10 × $28.89 -
×
3M 62820, Adhesive Sealant 760 UV, Gray, 600 mL Sausage Pack, 7000046611, 12/Case
12 × $26.69 -
×
3M 34573, Cubitron II Net Sheet Roll, 120+, 115 mm x 10 m, 7100247507, 6 Rolls/Case
6 × $43.97 -
×
3M 06742, Overspray Protective Sheeting, 20 ft x 250 ft, 7000120043
2 × $72.49 -
×
3M 72600, 663FC 1/2" X 30", 70u Diamond Trizact Belt, 7100206529
1 × $0.00 -
×
3M 34564, Cubitron II Net Sheet Roll, 180+, 70 mm x 10 m, 7100247499, 6 Rolls/Case
6 × $26.89 -
×
3M 27490, 641WY, 3" X 30", 1200 Mesh, Diamond Cloth Belts, 7010508907
1 × $142.63 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 30190, Trizact Hookit Foam Sheet, 2-3/4 in x 5-1/2 in (70 mm x 140 mm), 3000 grade, 7100072763, 5 sheets per pack
10 × $19.94 -
×
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
25 × $6.86 -
×
3M 27760, Hookit Microfinishing Film Disc 366L, 30 Mic 3MIL, Type D, 6 in x NH, Die 600Z, 7100049207, 500 per case
500 × $1.81 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $400.59 -
×
Dynabrade 92187 1" W x 30" L 80 Grit A/Z DynaCut Belt, 50/pack
50 × $3.54 -
×
3M 34566, Cubitron II Net Sheet Roll, 240+, 70 mm x 10 m, 7100247511, 6 Rolls/Case
6 × $26.89 -
×
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
10 × $62.51 -
×
3M 26312, PPS Series 2.0 Spray Cup System Kit, Midi (13.5 oz, 400 mL),
125 Micron Filter, 7100169346
1 × $103.16 -
×
3M 71512, Cloth Belt 340D, 50 X-weight, 3 in x 18 in, Fabri-lok, Single-flex, 7010294780, 25 per case
25 × $3.12 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 85391, Cloth Belt 963G, 50 YN-weight, 2 in x 72 in, Film-lok, L-flex, 7010299930, 50 per case
50 × $10.42 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,493.91 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
Insize 4706-1150, 120? SQUARE, 5.9x5.9", 6928640318276
1 × $51.21 -
×
3M 34562, Cubitron II Net Sheet Roll, 120+, 70 mm x 10 m, 7100247498, 6 Rolls/Case
6 × $30.20 -
×
3M 16582, Accuspray Atomizing Head, Blue, 1.2 mm, 7010363219
10 × $10.67 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.76 -
×
Standard Abrasives 713066, PSA A/O Disc, 8 in x NH, 60, 7010370082
10 × $2.48 -
×
3M 22971, Disc Holder Adapter 9, 5/8-11 External M10-1.25 Internal, 7000046094
10 × $13.80 -
×
3M 34554, Cubitron II Net Sheet Roll, 220+, 80 mm x 10 m, 7100247496, 6 Rolls/Case
6 × $31.57 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
$3.47
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
