-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 26139, PPS Series 2.0 Adapter, Type S43, 1/4 Male, 19 Thread BSP, 7100135337
4 × $25.96 -
×
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
25 × $6.86 -
×
3M 34574, Cubitron II Net Sheet Roll, 150+, 115 mm x 10 m, 7100247501, 6 Rolls/Case
12 × $43.97 -
×
3M 19766, Utility Cloth Sheet 314D, 9 in x 11 in P240 J-weight, 7000000354
50 × $1.37 -
×
Standard Abrasives 704491, Cartridge Roll Mandrel, 3/16 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-15, 7000121768
5 × $4.88 -
×
3M 36882, Self-Stick Liquid Protection Fabric, Blue, 56 in x 300 ft, 7100169350
2 × $1,246.87 -
×
3M 36880, Self-Stick Liquid Protection Fabric, Blue, 36 in x 300 ft, 7100169352
1 × $901.76 -
×
3M 34551, Cubitron II Net Sheet Roll, 120+, 80 mm x 10 m, 7100247481, 6 Rolls/Case
6 × $28.94 -
×
Standard Abrasives 78526, Ceramic Pro Type 29 Flap Disc, 645135, 4-1/2 in x 7/8 80 Y-weight, 7010369546, 10 per case
10 × $7.50 -
×
3M 34555, Cubitron II Net Sheet Roll, 240+, 80 mm x 10 m, 7100247339, 6 Rolls/Case
6 × $31.57 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $4.88 -
×
3M 34556, Cubitron II Net Sheet Roll, 320+, 80 mm x 10 m, 7100283765, 6 Rolls/Case, (Previously Item# 7100247340)
12 × $28.94 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 34577, Cubitron II Net Sheet Roll, 240+, 115 mm x 10 m, 7100247504, 6 Rolls/Case
6 × $42.69 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,509.65 -
×
3M 05442, Stikit Soft Hand Block, 2-3/4 x 5 in, 7000045435
10 × $28.89 -
×
3M 34578, Cubitron II Net Sheet Roll, 320+, 115 mm x 10 m, 7100247506, 6 Rolls/Case
12 × $43.97 -
×
3M 76900, Cloth Belt 340D, 50 X-weight, 37 in x 60 in, Film-lok, Single-flex, 7010361975, 3 per case
3 × $51.11 -
×
3M 66619, Cloth Belt 341D, 50 X-weight, 4 in x 24 in, Fabri-lok, Single-flex, 7010360692, 25 per case
25 × $5.52 -
×
3M 34567, Cubitron II Net Sheet Roll, 320+, 70 mm x 10 m, 7100247338, 6 Rolls/Case
6 × $26.89 -
×
3M 30137, Heavy Duty Canvas Wheel Masker, 20 inch, 7100145359, 4 per pack
1 × $129.38 -
×
3M 34561, Cubitron II Net Sheet Roll, 80+, 70 mm x 10 m, 7100247502, 6 Rolls/Case
6 × $30.20 -
×
3M 34566, Cubitron II Net Sheet Roll, 240+, 70 mm x 10 m, 7100247511, 6 Rolls/Case
6 × $26.89 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33
3M 23897, Cloth Belt 777F, 60 YF-weight, 1 in x 18 in, Fabri-lok, Full-flex, 7010307894, 200 per case
$3.47
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
