-
×
Dynabrade 57282 Housing for Model 56803; 12,000 RPM
1 × $107.62 -
×
Dynabrade 98242 "O" Ring
1 × $2.07
-
×
Dynabrade 13501 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 1,800 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $996.00 -
×
Dynabrade X61VHS 6" Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander with Speed Regulator
2 × $256.00 -
×
Dynabrade X52VHS 5" Dia. Vacuum Dynorbital Extreme Random Orbital Sander, Hook Pad W/ Speed Regulator
1 × $256.00 -
×
Dynabrade 55393 Grip, Vaned Pencil Grinder
1 × $8.57
-
×
Dynabrade 52722 Cone or Plug 6" (152 mm) Extension Wheel Grinder, 20,000 RPM, 3/8"-24 Male Thread Spindle
1 × $755.00 -
×
Dynabrade X61V 6" (152 mm) Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/16" Orbit, Hook-Face
1 × $234.00 -
×
Dynabrade 14265 Dynangle Contact Arm Assy
1 × $173.43 -
×
Dynabrade 55422 Housing Assembly for 52856, 60,000 RPM
1 × $117.28
-
×
Dynabrade 61534 Tanos Back Clip
1 × $31.09
-
×
Dynabrade 79013 1/2" W x 12" L 120 Grit A/Z DynaCut Belt, 50/pack
50 × $1.85 -
×
Dynabrade 95677 1/4" Male Plug with 1/4" NPT Female Thread
1 × $4.86 -
×
Dynabrade 94865 Air Hose 3/8" (10 mm) I.D. x 15 mm (O.D.)
1 × $5.57 -
×
Dynabrade 57412 Housing Model 57405
1 × $107.62
-
×
Dynabrade 60000 Dynuba 100, 11.25 oz. Aerosol Can
1 × $29.23 -
×
Dynabrade 11681 Dynabelter Contact Arm Assembly, 2 Inch Dia x 1 Inch W, 70 Durometer Wheel, Standard Serration
1 × $384.76 -
×
![Dynabrade 95396 [1" Thread - 1" Non-Thread], Non-Conductive Vacuum Hose Cuff](https://store.alloycoatingsupply.com/wp-content/uploads/2018/08/95396-300x300.jpg)
Dynabrade 95396 [1" Thread - 1" Non-Thread], Non-Conductive Vacuum Hose Cuff
1 × $10.05 -
×
Dynabrade 11816 Bolt
1 × $42.54
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
$14.65
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
