-
×
Dynabrade 91721 DynaMesh 5" 400 Grit Hook & Loop Discs, 50 per box
1 × $53.50 -
×
Dynabrade 82575 1/8" W x 24" L 80 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.38 -
×
Dynabrade 10843 DynaPen Reciprocating Tool, 14,000 SPM, 1/8" Collet
1 × $499.00 -
×
Dynabrade 51346 3" (51 mm) Dia. Locking-Type Disc Pad, Medium Density, 1/4"-20 Thread
1 × $17.18 -
×
Dynabrade 58418 6" Dia.Two-Hand Dynorbital Random Orbital Sander, Non-Vacuum
2 × $591.00 -
×
Dynabrade 79857 3" 220 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
Dynabrade 79165 1/4" W x 30" L 80 Grit Ceramic DynaCut Belt, 50/pack
50 × $3.46 -
×
Dynabrade 91629 1-1/2" W x 24" L 320 Grit A/O DynaCut Belt, 10/pack
10 × $6.07 -
×
Dynabrade 49430 Mini Angle Head Drill, .4 HP, Rear Exhaust, 3,200 RPM, 1/4"-28 Female Thread
1 × $1,260.00 -
×
Dynabrade 90400 1/2" W x 24" L Very Fine NWN DynaBrite Premium Belts, 10/pack
10 × $9.12 -
×
Dynabrade 57332 Lock Ring
1 × $39.08 -
×
Dynabrade 11910 Shaft
1 × $47.03 -
×
Dynabrade X62H 6" (152 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, Hook-Face
1 × $223.00 -
×
Dynabrade 82446 6" Dia. x 150 Grit A/O Hook Non-Vacuum Film-Backed DynaCut Disc, 100/Box
100 × $1.62 -
×
Dynabrade 59095 Speed Regulator, Silver, w/Low Speed
1 × $21.07
-
×
Dynabrade 50789 Shroud 3_ Vac. Coated Abrasive Disc Sander
1 × $79.84 -
×
Dynabrade 02679 Shield
1 × $5.49 -
×
Dynabrade 78876 Knot Wire Wheel 3-1/4" Dia. x .0118 x 3/8" Steel
1 × $40.30 -
×
Dynabrade 64861 Variable Speed Versatility Grinder, Slack-Action, 1 hp, 120 V (AC), 1 Phase, 50/60 Hz, 600-4,000 SFPM, for 1/4"-2" W x 72" L (6-51 mm x 122 cm) Belts
1 × $6,951.00 -
×
Dynabrade 52169 Handle Assembly
1 × $51.26 -
×
Dynabrade 64208 33" (84 cm) W x 41" (104 cm) L Downdraft Sanding Table, 230 V (AC)
1 × $5,965.11 -
×
Dynabrade 53531 Cone or Plug Grinder (Single Extension), 18,000 RPM, 3/8"-24 Male Thread Spindle
1 × $1,087.00
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
$14.65
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
