-
×
Dynabrade 13500 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 950 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 53523, Tartan Box Sealing Tape 305, Clear, 48 mm x 1500 m, 6 Rolls/Case, 7100240719
6 × $32.82 -
×
Dynabrade 80060 Motor Replacement, 230V-50/60 Hz, 1400 W
1 × $170.43
-
×
Dynabrade 67245 1/4" x 3/8" Flat Steel Cont. Arm Ass'y
1 × $128.70
-
×
Dynabrade 69481 5" Extreme Drop-in Motor, 3/32" Orbit
1 × $164.91 -
×
Dynabrade 96024 Tune-Up Kit for Orbital Sanders
1 × $168.41 -
×
Dynabrade 56316 3" x 4-1/4" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $33.57 -
×
Dynabrade 64116 Filter
1 × $107.62 -
×
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
1 × $558.00 -
×
Dynabrade 58506 3-7/8" W x 5-5/8" L Dynabug II Orbital Sander, Central Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $263.00 -
×
Dynabrade 55204 Vane Set (4pk)
1 × $39.08 -
×
3M 53530, Scotch Box Sealing Tape 313, Clear, 48 mm x 100 m, 36 Rolls/Case, 7100240701
36 × $7.08
-
×
Dynabrade 52101 .5 hp Straight-Line Die Grinder, Rear Exhaust, 3,400 RPM, 1/4" Collet
1 × $686.00 -
×
Dynabrade 11231 Contact Arm Ass'y, 3/4" Dia. x 1/2" W, Rubber Wheel, with 1/2" W Platen
1 × $73.36 -
×
3M 53699, Scotch High Tack Box Sealing Tape 373+, Clear, 72 mm x 914 m, 4 Rolls/Case, 7100266183
4 × $145.66
-
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Dynabrade 56106 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
1 × $24.59 -
×
Dynabrade 56178 6" Dia. Vacuum Disc Pad, Vinyl-Face
1 × $29.74 -
×
Dynabrade 01480 Vane Set (4pk)
1 × $26.09
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
$14.65
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
