-
×
Dynabrade 79854 3" 120 Grit Dynacut Extreme Orange Film Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
Dynabrade 58418 6" Dia.Two-Hand Dynorbital Random Orbital Sander, Non-Vacuum
1 × $591.00 -
×
3M 91447, Scotch Shipping Packaging Tape 3350-RD-36GC, 1.88 in x 54.6 yd (48 mm x 50 m), 7100260715
36 × $3.65 -
×
Dynabrade 94826 - 1/2" ID, 10' Long Air Hose Assembly, Female/ Male Fitting Ends Included
1 × $81.15 -
×
Dynabrade 96529 Tune-Up Kit for .7 hp Motor, Front and Rear Exhaust
1 × $131.67 -
×
Dynabrade 50273 Locking Flange Nut, 5/8"-11 Thread
1 × $22.19 -
×
Dynabrade 91629 1-1/2" W x 24" L 320 Grit A/O DynaCut Belt, 10/pack
10 × $6.07 -
×
Dynabrade Nitro Series NZ1 NitroZip, Eraser Tool
1 × $464.00 -
×
Dynabrade 57362 Gasket
1 × $7.78
-
×
Dynabrade 56197 6" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $29.03 -
×
Dynabrade 11912 Pressure Post
1 × $48.50
-
×
Dynabrade 57413 Housing - Model 57407
1 × $107.62
-
×
Dynabrade 55035 Trigger
1 × $8.85
-
×
Dynabrade 58502 3" W x 4-1/4" L Dynabug II Orbital Sander, Central Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $263.00 -
×
Dynabrade 78645 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Z/A, 60 Grit, 100/pack
100 × $1.10 -
×
Dynabrade 61525 Base
1 × $177.30
-
×
Dynabrade 57371 Shroud
1 × $48.62 -
×
Dynabrade 65753 2" x 48" (51 mm x 122 cm) Electric Variable Speed Tool Post Grinder, 3 hp, Wet, 440 V (AC), 3 Phase, 50/60 Hz
1 × $10,201.00 -
×
Dynabrade 78725 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Dynabrade 61398 Locking Pin Bushing
1 × $22.54
-
×
Dynabrade 57412 Housing Model 57405
1 × $107.62
-
×
Dynabrade 01185 Vane Set (4pk)
1 × $26.54 -
×
Dynabrade 31968 Conductive Y Adapter
1 × $49.41 -
×
Dynabrade 25230 Gear Set- 1.176: 1 Ratio, 1.3Hp
1 × $235.71
-
×
Dynabrade 02108 Housing for Model 51411 - 3,200 RPM
1 × $109.36 -
×
Standard Abrasives 702091, A/O Straight Cartridge Roll 1/2 in x 1-1/2 in x 1/8 in 50, 7100103100
100 × $0.58
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
$14.65
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
