-
×
3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
200 × $0.82 -
×
Dynabrade 11254 Contact Arm Ass'y, 4-3/4" Dia. x 1/2" W
1 × $508.22 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $715.47 -
×
3M 29831, Sanding Screen, 180 Grit, 18 in x NH, 7100160238
12 × $5.83 -
×
3M 01133, Hookit Red Finishing Film Abrasive Disc 260L, 6 in, Dust Free, P1500, 7010290267, 25 discs per carton
4 × $49.76 -
×
3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
1 × $19.01 -
×
3M 54285, Particulate Respirator 8271, P95, 7000002047, 80 EA/Case
1 × $325.59 -
×
3M 45702, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, Die 300V, 7100113117
200 × $0.86 -
×
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
1 × $397.07 -
×
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $976.11 -
×
Dynabrade 51632 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $573.77 -
×
3M 29832, Sanding Screen, 150 Grit, 18 in x NH, 7100160831
12 × $6.21 -
×
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
200 × $1.92 -
×
3M 03647, Scotch-Brite Edger Disc Pad, 7 in x .875 in, 7000133920
40 × $2.12 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
$14.65
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
