-
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $370.16 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 27760, Hookit Microfinishing Film Disc 366L, 30 Mic 3MIL, Type D, 6 in x NH, Die 600Z, 7100049207, 500 per case
500 × $1.81 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Standard Abrasives 714719, A/O Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 80, 7100092959
50 × $0.97 -
×
3M 36864, Dirt Trap Material Floor Dispenser, 56 in, 7000119908
1 × $873.93 -
×
3M 20227, Scotch-Seal Metal Sealant 2084, Silver, 5 oz Tube, 7000046343, 36/Case
36 × $23.01 -
×
ACS 3" Diamond Disc, 60 Mesh, W/ Metal Button
1 × $27.50 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $18.24 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Standard Abrasives 707505, PSA A/O Disc, 12 in x NH, 40 Grit, 7010369974
10 × $6.35 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
Standard Abrasives 880213, Buff and Blend GP Wheel, 2 in x 1 Ply x 1/4 in A MED, 7100095601
10 × $5.57 -
×
3M 76733, Cloth Belt 777F, 80 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118454, 20 per case
20 × $30.30 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39
3M 22971, Disc Holder Adapter 9, 5/8-11 External M10-1.25 Internal, 7000046094
$13.80
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
