The open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. The 3M Roloc attachment system gives you quick and easy disc change-out, making the SE Roloc disc ideal for heavy duty deburring and finishing.
SE surface conditioning discs use aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our 3M Roloc TR, TS, and TSM quick change discs are smaller discs that easily and quickly attach onto a Roloc disc pad (sold separately) so that you can conveniently change discs from job to job or in multi-step finishing processes. Our 3M Roloc Quick Change Attachment System provides a secure attachment even for heavy-duty applications, and the variety of available Roloc discs allows swapping from one application to the next in seconds. Each disc is also color-coded to identify its grade, making it easy to grab the grade required for different applications.
We developed Scotch-Brite surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc.

Insize 3101-200E, DIGITAL OUTSIDE MICROMETER, IP65, 7-8"/175-200mm, 6928640326851
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
Dynabrade 55501 .1hp Pencil Grinder, Twin Turbine, 100,000 RPM, Nickel-Plated Aluminum Housing, 3mm Collet
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M 45717, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 5 in x NH, D/F 5HL, Die 500FH, 7100113111
Dynabrade 77775 5" Dia. x 7/8" Center Hole, 120 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
Dynabrade 54039 3/8"-24 Female 5/16"-24 Female, 1" Length
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
Dynabrade 51812 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 3/32" Collet
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
Standard Abrasives 42620, A/O Flap Wheel 621405, 1 in x 1 in x 1/4-20 in 60, 7010294994, 10 per case
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757 
