-
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
1 × $83.35 -
×
Dynabrade 90411 1/8" W x 24" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $0.85 -
×
Dynabrade 90549 1/2" W x 44" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $2.72 -
×
Dynabrade 79061 1/2" W x 24" L 60 Grit A/Z DynaCut Belt, 50/pack
50 × $1.57 -
×
Dynabrade 95216 Pin
1 × $2.07 -
×
Dynabrade 50296 5" Dia. Disc Backup Pad, Hard Density, 5/8"-11 Thread
2 × $35.86 -
×
Dynabrade 56323 3-7/8" x 5-5/8" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $35.13 -
×
Dynabrade 82555 1/2" W x 18" L 60 Grit Ceramic DynaCut Belt, 50/pack
50 × $2.86 -
×
Dynabrade 56316 3" x 4-1/4" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $33.57 -
×
Dynabrade 11399 Type 27 Wheel Mounting Adapter Kit
1 × $111.09 -
×
Dynabrade 90297 1/2" W x 18" L Coarse NWN DynaBrite Premium Belts, 10/pack
10 × $8.66 -
×
Dynabrade 15336 Rubber Drive Wheel
1 × $76.45 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
150 × $1.29 -
×
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.10 -
×
Dynabrade 95850 - 1/4" Female Coupler with 1/4" Female Plug Assembly
2 × $31.89 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Dynabrade 98580 Motor Tune-Up Kit for National Detroit Sander Models
1 × $130.00 -
×
Dynabrade 78424 4-1/2" Dia. x 3/8" Medium DynaBrite Surface Conditioning Disc, 25/pack
25 × $5.21 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.90 -
×
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $2.55 -
×
Dynabrade 78055 1" W x 24" L Medium NWN DynaBrite Belt, 10/pack
20 × $9.46 -
×
Dynabrade 79808 DynaBolt AO 4" x .035" x 3/8" T1 Cut-off Wheel, Box of 10 Discs
10 × $2.14 -
×
3M 85365, Scotch Heavy Duty Shipping Packaging Tape 3850-RD-36GC, 1.88 in x 54.6 yd (48 mm x 50 m), 7100247628
36 × $6.14
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
$5.62
Factory Stock, 7-10 Day Leadtime
Our 3M Roloc+ Button plays an important role in the 3M Roloc+ Attachment system, and it’s designed to drive 3M Unitized Wheels that contain a 3/8″ inch center hole.
Extended Shank Allows Side Loading
A threaded shank on the 3M Roloc + Button passes through the unitized wheel’s 3/8″ center hole and twists into a Roloc + holder. (Note: The Roloc + holder comes in the 3M Roloc+ Button Combination Pack or can be purchased separately). Then, the 3M Roloc + holder (sold separately) can be mounted on the power tool, most commonly on tools featuring a _? collet chuck. The 3M Roloc+ Button has an extended load bearing shank, which provides added bending strength for applications using Unitized Wheels where side loading occurs.
