-
×
Dynabrade 56158 6" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $41.07 -
×
Dynabrade 58516 - 68 mm x 196 mm Dynabug II Orbital Sander, Vacuum
1 × $250.00 -
×
Dynabrade 98580 Motor Tune-Up Kit for National Detroit Sander Models
1 × $130.00 -
×
Dynabrade 92115 1/2" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
2 × $83.35 -
×
Dynabrade 90353 3-1/2" W x 15-1/2" L 60 Grit A/O DynaCut Belt, 10/ pack
10 × $4.66 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 78055 1" W x 24" L Medium NWN DynaBrite Belt, 10/pack
10 × $9.46 -
×
Dynabrade 82489 6" Dia. x 100 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.47 -
×
Dynabrade 54947 Spring, Throttle Ball
1 × $4.58 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.29
-
×
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
10 × $1.57 -
×
Dynabrade 56315 3" x 4-1/4" Non-Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $32.01 -
×
Dynabrade 95850 - 1/4" Female Coupler with 1/4" Female Plug Assembly
1 × $31.89
-
×
Dynabrade 01794 Rubber Drive Wheel
1 × $299.83 -
×
Dynabrade 13505 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8"-11 Arbor
1 × $996.00 -
×
Dynabrade 90407 1/8" W x 24" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $0.85 -
×
Dynabrade 98276 - 1/2" Male Coupler with 1/2" Female Plug Assembly
1 × $80.94 -
×
Dynabrade 90368 3/4" W x 34" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $2.55 -
×
Dynabrade 59380 Rotor/Vane Set
1 × $71.27 -
×
Dynabrade 39200 2" Type C, Roto Peen Flaps
1 × $70.53 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.90 -
×
Dynabrade 79145 1/4" W x 24" L 60 Grit DynaCut Premium Ceramic Belt, 50/pack
50 × $3.19 -
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $13.53 -
×
Dynabrade 56205 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
1 × $18.68
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
$5.62
Factory Stock, 7-10 Day Leadtime
Our 3M Roloc+ Button plays an important role in the 3M Roloc+ Attachment system, and it’s designed to drive 3M Unitized Wheels that contain a 3/8″ inch center hole.
Extended Shank Allows Side Loading
A threaded shank on the 3M Roloc + Button passes through the unitized wheel’s 3/8″ center hole and twists into a Roloc + holder. (Note: The Roloc + holder comes in the 3M Roloc+ Button Combination Pack or can be purchased separately). Then, the 3M Roloc + holder (sold separately) can be mounted on the power tool, most commonly on tools featuring a _? collet chuck. The 3M Roloc+ Button has an extended load bearing shank, which provides added bending strength for applications using Unitized Wheels where side loading occurs.
