-
×
Dynabrade 52415 3" Dia. 7 Degree Offset Disc Sander, Rear Exhaust, .7 HP, 20,000 RPM, 3/8"-24 Thread
1 × $610.00 -
×
Dynabrade 56205 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
2 × $18.68 -
×
Dynabrade 53048 1/4" Drill Right Angle, .4 HP, Rear Exhaust, 20,000 RPM
1 × $816.00 -
×
Dynabrade 94112 7" Dynacut Diamond Segmented Rim Cut-Off Blade
1 × $120.47 -
×
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 78724 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.90 -
×
Dynabrade 79061 1/2" W x 24" L 60 Grit A/Z DynaCut Belt, 50/pack
50 × $1.57 -
×
Dynabrade 57113 Rotor/Vane Set
1 × $65.09 -
×
Dynabrade 95886 Washers For Vacuum Shroud (57737)
1 × $2.07 -
×
Dynabrade 21407 ND1080RM, Trigger, Black, CE, 75 PSI
1 × $17.35 -
×
Dynabrade 79835 3" 800 Grit Dynacut Extreme Orange Film Non Vac Hook Face Disc, 50 per box
1 × $35.37 -
×
Dynabrade 59380 Rotor/Vane Set
1 × $71.27
-
×
Dynabrade 39200 2" Type C, Roto Peen Flaps
2 × $70.53 -
×
Dynabrade 90211 1/8" W x 18" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.10 -
×
Dynabrade 82489 6" Dia. x 100 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.47 -
×
Dynabrade 78538 3/4"Dia. 2-Set, 3-48 Female Center Thread, 80 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
100 × $1.10 -
×
Dynabrade 96459 O-Ring
1 × $2.07 -
×
Dynabrade 64900 Variable Speed Versatility Grinder, 1 hp, 115 V (AC), 1 Phase, 50/60 Hz, 600-4,000 SFPM, for 1/4"-2" W x 72" L (6-51 mm x 122 cm) Belts
1 × $6,372.00 -
×
Dynabrade 54947 Spring, Throttle Ball
1 × $4.58
-
×
Dynabrade 56705 Post Cap
1 × $16.16 -
×
Dynabrade X52H 5" (127 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, Hook-Face
1 × $223.00 -
×
Dynabrade 78055 1" W x 24" L Medium NWN DynaBrite Belt, 10/pack
10 × $9.46 -
×
Dynabrade 95216 Pin
1 × $2.07 -
×
Dynabrade 78739 5/16" x 5/8"- B53 DynaFire A/O Vitrified Mounted Point, 5/pack
5 × $2.36 -
×
Dynabrade 15101 Tension Arm (for Mini Dynafile II)
1 × $47.74 -
×
Dynabrade 11005 Dynafile Belt Housing Guard
1 × $52.09 -
×
Dynabrade 45242 Sleeve, for 48503, 25K RPM
1 × $43.44
-
×
Dynabrade 79004 1/8" W x 12" L 80 Grit A/Z DynaCut Belt, 50/pack
50 × $1.24 -
×
Dynabrade 57383 Vacuum Gasket
1 × $7.02
-
×
Dynabrade 90924 3" Dia. x 40 Grit A/Z DynaCut Locking-Type (TR), Flap Disc, 10/pack
10 × $4.61
3M 14915, Roloc+ Button Combination Pack 1 and 7, 1/4 in Shank, 7000120713
This item has been Discontinued. Please see 3M suggested replacement item 7100329866 & 7000045945.
Our 3M Roloc+ Button plays an important role in the 3M Roloc+ Attachment system, and it’s designed to drive 3M Unitized Wheels that contain a 3/8″ inch center hole.
Extended Shank Allows Side Loading
A threaded shank on the 3M Roloc + Button passes through the unitized wheel’s 3/8″ center hole and twists into a Roloc + holder. (Note: The Roloc + holder comes in the 3M Roloc+ Button Combination Pack or can be purchased separately). Then, the 3M Roloc + holder (sold separately) can be mounted on the power tool, most commonly on tools featuring a _? collet chuck. The 3M Roloc+ Button has an extended load bearing shank, which provides added bending strength for applications using Unitized Wheels where side loading occurs.
