-
×
Dynabrade 55051 Valve Stop
1 × $20.82 -
×
Dynabrade 11005 Dynafile Belt Housing Guard
2 × $52.09 -
×
Dynabrade 92208 1/8" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.02 -
×
Dynabrade 79145 1/4" W x 24" L 60 Grit DynaCut Premium Ceramic Belt, 50/pack
50 × $3.19 -
×
Dynabrade 98580 Motor Tune-Up Kit for National Detroit Sander Models
1 × $130.00 -
×
Dynabrade 01794 Rubber Drive Wheel
1 × $299.83 -
×
Dynabrade 90499 1/2" W x 34" L 120 Grit A/O DynaCut Belt, 50/pack
150 × $2.27 -
×
Dynabrade 97572 - 1/4" Safety Female Coupler w/Male Plug
1 × $35.06 -
×
Dynabrade 95216 Pin
1 × $2.07 -
×
Dynabrade 54907 Bearing- 19 x 7 x 6
1 × $23.44 -
×
Dynabrade 52101 .5 hp Straight-Line Die Grinder, Rear Exhaust, 3,400 RPM, 1/4" Collet
1 × $686.00 -
×
Dynabrade 45257 Bushing, Throttle
1 × $17.36 -
×
Dynabrade 94775 2" W x 72" L 60 Grit A/Z DynaCut Belt, 10/pack
10 × $12.97 -
×
Dynabrade 80088 Motorhead Ass'y-230V-50 Hz
1 × $629.38
-
×
Dynabrade 01480 Vane Set (4pk)
1 × $26.09 -
×
Dynabrade 90272 3-1/2" W x 15-1/2" L 60 Grit A/Z DynaCut Belt, 10/ Pack
10 × $7.53 -
×
Dynabrade 56323 3-7/8" x 5-5/8" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $35.13 -
×
Dynabrade 40736 Screw
1 × $3.33
-
×
Dynabrade 45278 Filter
1 × $1.91
-
×
Dynabrade 93906 3" Dia. Continuous Rim Diamond Mounted Cut-Off Wheel
1 × $236.62 -
×
Dynabrade 11395 Guide Wheel
1 × $39.90 -
×
Dynabrade 50296 5" Dia. Disc Backup Pad, Hard Density, 5/8"-11 Thread
1 × $35.86 -
×
Dynabrade 90407 1/8" W x 24" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $0.85 -
×
Dynabrade 79061 1/2" W x 24" L 60 Grit A/Z DynaCut Belt, 50/pack
50 × $1.57 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Dynabrade 56180 5" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $25.46
3M 14915, Roloc+ Button Combination Pack 1 and 7, 1/4 in Shank, 7000120713
This item has been Discontinued. Please see 3M suggested replacement item 7100329866 & 7000045945.
Our 3M Roloc+ Button plays an important role in the 3M Roloc+ Attachment system, and it’s designed to drive 3M Unitized Wheels that contain a 3/8″ inch center hole.
Extended Shank Allows Side Loading
A threaded shank on the 3M Roloc + Button passes through the unitized wheel’s 3/8″ center hole and twists into a Roloc + holder. (Note: The Roloc + holder comes in the 3M Roloc+ Button Combination Pack or can be purchased separately). Then, the 3M Roloc + holder (sold separately) can be mounted on the power tool, most commonly on tools featuring a _? collet chuck. The 3M Roloc+ Button has an extended load bearing shank, which provides added bending strength for applications using Unitized Wheels where side loading occurs.
