-
×
Dynabrade 52861 .4 hp Straight-Line Pencil Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $555.41 -
×
Dynabrade 11280 Contact Arm Ass'y, 1" Da. x 3/8" W, Tapered Rubber Wheel, No Platen/Offset Design
2 × $99.36 -
×
Dynabrade 64000 SuperFinisher, 115 Volts (AC), 1 Phase, 60 Hz
2 × $18,455.12 -
×
Dynabrade 82593 2" W x 72" L 80 Grit Ceramic DynaCut Belt, 10/pack
30 × $115.80 -
×
3M 65087, Scotch-Brite Diamond Wheel, 3" x 1/2" x 3/8" 645DC, 7100083803
1 × $107.65 -
×
Dynabrade 95848 Dynabrade Gear Oil
2 × $12.37 -
×
Dynabrade 94778 1/2" W x 72" L 80 Grit A/Z DynaCut Belt, 10/pack
30 × $3.01 -
×
Dynabrade 94790 1/2" W x 72" L 120 Grit A/Z DynaCut Belt, 10/pack
10 × $3.01
-
×
Dynabrade 82577 1/2" W x 24" L 80 Grit Ceramic DynaCut Belt, 50/pack
50 × $3.19 -
×
Dynabrade 11232 Contact Arm Ass'y, 1" Dia. x 3/8" W, Tapered Rubber Wheel, with no Platen
2 × $86.46 -
×
Dynabrade 95965 Water Flow Adjustment
3 × $21.05 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $688.35 -
×
Dynabrade 95990 Wet Tank Assembly
1 × $137.01 -
×
Dynabrade 82594 2" W x 72" L 120 Grit Ceramic DynaCut Belt, 10/pack
10 × $115.80
-
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $1,925.99 -
×
Dynabrade 91163 3/8" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.60 -
×
3M 64324, Foil Tape 3340, Silver, 72 mm x 45.7 m, 3.9 mil, 7010335734
16 × $33.04 -
×
Dynabrade 80459 HEPA 13 Vacuum Cartridge Filter
1 × $123.89 -
×
Dynabrade 78425 4-1/2" Dia. x 3/8" Coarse DynaBrite Surface Conditioning Disc, 25/pack
25 × $6.23 -
×
Insize 1540-L600, EXTENSION BASE, 23.622", 6940561964271
1 × $323.20 -
×
Dynabrade 92120 1/4" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
50 × $1.07
-
×
Dynabrade 64002 SuperFinisher, 230 Volts (AC), 1 Phase, 50 Hz
1 × $14,467.64 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67
3M 14915, Roloc+ Button Combination Pack 1 and 7, 1/4 in Shank, 7000120713
This item has been Discontinued. Please see 3M suggested replacement item 7100329866 & 7000045945.
Our 3M Roloc+ Button plays an important role in the 3M Roloc+ Attachment system, and it’s designed to drive 3M Unitized Wheels that contain a 3/8″ inch center hole.
Extended Shank Allows Side Loading
A threaded shank on the 3M Roloc + Button passes through the unitized wheel’s 3/8″ center hole and twists into a Roloc + holder. (Note: The Roloc + holder comes in the 3M Roloc+ Button Combination Pack or can be purchased separately). Then, the 3M Roloc + holder (sold separately) can be mounted on the power tool, most commonly on tools featuring a _? collet chuck. The 3M Roloc+ Button has an extended load bearing shank, which provides added bending strength for applications using Unitized Wheels where side loading occurs.
