-
×
3M 31381, Cubitron II Hookit Marine Sanding Abrasive Disc 737U, 31381, 6 in, 120+, 7100062433
80 × $19.02 -
×
3M 34565, Cubitron II Net Sheet Roll, 220+, 70 mm x 10 m, 7100247497, 6 Rolls/Case
12 × $27.69 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 120" 125U
16 × $27.50 -
×
3M 88906, PSA Cloth Disc 348D, 36 X-weight, 12 in x NH, Die 1200B, 7000118898
10 × $8.91 -
×
3M 28324, Clean Sanding Interface Pad, 3 in x 4 in x 1/2 in 33 Holes, 7100138159
10 × $14.83 -
×
ACS Diamond Cloth Belt, CX1250 1" X 64" 125U
6 × $40.60
-
×
Dynabrade 91425 1/4" W x 12" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.07 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
100 × $1.20
-
×
ACS Diamond Cloth Belt, CX1250 1" X 42" 200U
6 × $25.65
-
×
3M 88871, PSA Cloth Disc 777F, 60 YF-weight, 12 in x NH, Die 1200B, 7000120238
10 × $15.13 -
×
Dynabrade 91428 1/2" W x 12" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.20
-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 70884, Sanding Belt, 9262NA-2, 3 in x 18 in, Coarse, 50 grit, 7010291277, 2 per pack, 10 packs per case
10 × $2.14 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67
3M 14895, Cloth Belt 777F, 80 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010299926, 200 per case
$4.46
Factory Stock, 7-10 Day Leadtime
Take advantage of increased durability and cutting efficiency with 3M Cloth Belt 777F. This belt features a blend of 3M Ceramic Abrasive Grain and aluminum oxide that outperforms aluminum oxide belts in stock removal and metal finishing applications. The heavyweight cloth backing supports high-pressure applications, performs well on heat-sensitive metals, and can be used dry or with lubricant.
Deburr, Blend and Finish Stainless Steel
3M Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.
Ceramic Abrasive Grain Boosts Performance
For increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.
Sized to Suit Your Needs
These abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Find Your Flex
Belts come with various flexibilities and splices that join the belt ends. Our 3M Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.
Applications
- Moderate stock removal
- Deburring stainless steel
- Finishing stainless steel
- Surface preparation
