-
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
1 × $52.38 -
×
Dynabrade 91242 8" Dia. x 220 Grit A/O Non-Vacuum PSA DynaCut Disc, 25/Box
25 × $2.95 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $1.07 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
3M 62820, Adhesive Sealant 760 UV, Gray, 600 mL Sausage Pack, 7000046611, 12/Case
12 × $28.29 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $36.81 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $10.47 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $10.47 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Standard Abrasives 725002, Buff and Blend Cross Buff GP, A/O VFN, 1-1/2 in x 1/2 in x 2 Ply x 8-32, 7010368694
50 × $4.12 -
×
Standard Abrasives 707195, Aluminum Oxide Handy Roll, P80 J-weight, 2 in x 50 yd, 7100031626
1 × $55.07 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
3M 62818, Adhesive Sealant 760 UV, Black, 600 mL Sausage Pack, 7000121496, 12/Case
12 × $28.29 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
3M 54159, Full Facepiece Reusable Respirator 6900 Large, 7000002037, 4 EA/Case
1 × $759.92 -
×
NORTON 66623313925 - 2" Dia. Blaze Rapid Blend Quick-Change TS (TYPE II) Non-Woven Disc, 25 Each
25 × $5.29 -
×
Norton 66252843323 - 4 -1/2" X 1/8" X 5/8" Center Hub, NORZON PLUS Type 27 Depressed Center Cut Off And Grinding Wheel, 10 Each
10 × $10.68 -
×
3M 35124, Grippy Sanding Cloth Trial Kit, 7100230957
10 × $6.84 -
×
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $303.80 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.54
3M 07545, Brake Hub Cleaning Disc Holder, 7000121093
$26.37
Factory Stock, 7-10 Day Leadtime
The 3M Brake Hub Cleaning Disc Holder is used to attach and hold our brake hub cleaning discs to die grinders or right angle disc sanders. Our 3M Brake Hub Cleaning Disc Holder and associated discs are designed to remove rust and corrosion from metal surfaces, particularly around wheel studs on brake drums or rotors.
Quick Rust Removal
We designed the 3M™ Brake Hub Cleaning Disc Holder as an essential piece of our brake hub cleaning product line. When used along with our Scotch-Brite™ Roloc™ Brake Hub Cleaning Disc, these components allow operators to achieve quick rust removal on the brake drums and rotors.
Easy Attachment
This disc holder attaches to any die grinder or drill and provides a hard supporting surface for your abrasive pads. Pads twist and lock tightly into the holder while still being easy to remove and change thanks to our Roloc™ attachment design. The holder’s length and central hole allow you to remove rust around the wheel studs.
Clean Brake
Cleaning the brake hub is an important step in reducing the potential for misalignment between the hub and wheel. Misalignment between the brake hub and wheel can lead to drivability concerns like brake pedal pulsation or steering wheel shimmy. As corrosion may prevent proper hub and wheel alignment, 3M™ has designed the Brake Hub Cleaning products to give operators a quick and effective means of removing rust from brake rotors and drums, particularly around wheel studs.
