-
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $10.47 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 62819, Adhesive Sealant 760 UV, Gray, 290 mL Cartridge, 7100097767, 12/Case
12 × $21.04 -
×
Dynabrade 91426 1/4" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
ACS 1/2 in x 18 in Diamond Metal Bond Belt, 120M/125u
1 × $30.00 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
480 × $9.21 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.66 -
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $84.19 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
3M 05744, Hookit Hand File Board, 2-3/4 in x 16 in, 7000045717
1 × $81.52 -
×
3M 45708, Cubitron II Hookit Cloth Disc 947A, 60+ X-weight, 6 in x NH, Die 600Z, 7100113142
200 × $3.57 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.74 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55
3M 07545, Brake Hub Cleaning Disc Holder, 7000121093
$26.37
Factory Stock, 7-10 Day Leadtime
The 3M Brake Hub Cleaning Disc Holder is used to attach and hold our brake hub cleaning discs to die grinders or right angle disc sanders. Our 3M Brake Hub Cleaning Disc Holder and associated discs are designed to remove rust and corrosion from metal surfaces, particularly around wheel studs on brake drums or rotors.
Quick Rust Removal
We designed the 3M™ Brake Hub Cleaning Disc Holder as an essential piece of our brake hub cleaning product line. When used along with our Scotch-Brite™ Roloc™ Brake Hub Cleaning Disc, these components allow operators to achieve quick rust removal on the brake drums and rotors.
Easy Attachment
This disc holder attaches to any die grinder or drill and provides a hard supporting surface for your abrasive pads. Pads twist and lock tightly into the holder while still being easy to remove and change thanks to our Roloc™ attachment design. The holder’s length and central hole allow you to remove rust around the wheel studs.
Clean Brake
Cleaning the brake hub is an important step in reducing the potential for misalignment between the hub and wheel. Misalignment between the brake hub and wheel can lead to drivability concerns like brake pedal pulsation or steering wheel shimmy. As corrosion may prevent proper hub and wheel alignment, 3M™ has designed the Brake Hub Cleaning products to give operators a quick and effective means of removing rust from brake rotors and drums, particularly around wheel studs.
