-
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
3M 11000, Roloc Disc 361F, 24 YF-weight, TR, 2 in, Die R200P, 7000028183
200 × $1.40 -
×
3M 43797, Hi-Strength 90 Spray Adhesive, Clear, 5 Gallon Drum (Pail), 7100004706
5 × $99.88 -
×
3M 19871, Neoprene High Performance Rubber and Gasket Adhesive 1300, Yellow, 1 Quart Can, 7100025171, 12/case
12 × $74.01 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.74 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
1 × $59.95 -
×
Insize 1151-300, DIGITAL HEIGHT GAGE, 0-12"/0-300mm, 6928640302725
1 × $772.44 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $87.98 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $36.81 -
×
3M 76632, Roloc Disc 777F, 50 YF-weight, TR, 3 in, Die R300V, 7000045628
400 × $1.65 -
×
3M 47088, Cubitron II Stikit Film Disc 775L, 240+, 6 in x NH, Linered w/Tab, Die 600Z, 7100145372, 250 per case
250 × $1.62 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
1 × $303.80 -
×
Air Turbine Tools 310RDM - 1/4" Router Hand Tool Series, 30,000RPM, 33432
1 × $950.00 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.95 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.66
3M 07499, Stripe Off Wheel 4 in x 5/8 in, 7100150306, 5 per case
$47.05
Factory Stock, 7-10 Day Leadtime
Our 3M Stripe Off Wheel was designed for high-speed removal of vinyl, decals, tape, graphics and double sided molding striping and trim. We engineered this wheel to help operators achieve effective and efficient decal removal without damaging the surface below.
Our 3M Stripe Off Wheel moves in a rapid, circular motion to remove unwanted decals and stripes. The solid molded wheel rids the substrate of decals with friction, instead of abrasives, thereby preventing scratching and damage to the substrate. The wheel can be used at a Max RPM of 4,000. Operators should note that it is important not to exceed the maximum operating speed, because it may compromise the product’s performance. Additionally, operators should ensure that the substrate is not heat sensitive, as repeated friction will create heat.
Trust our 3M Stripe Off Wheel to cleanly and efficiently remove unwanted decals without substrate damage.
