-
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
600 × $1.05 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
600 × $1.07 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
800 × $1.54 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
1000 × $0.66 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
1000 × $0.64 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
400 × $1.46
-
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.74 -
×
3M 17584, Repulpable Strong Single Coated Tape R3187, Blue, 48 mm x 55 m, 7.5mil, 24 rolls per case, 7100028023
24 × $33.32 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
400 × $1.64 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
600 × $6.63 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.77 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
1000 × $0.74 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.38 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.82 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
1000 × $0.66 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $1.05 -
×
3M 36249, Hookit Blue Abrasive Disc, 6 in, 500 grade, No Hole, 7100199658, 50 discs per carton
4 × $45.41 -
×
3M 36265, Stikit Blue Abrasive Disc Roll, 5 in, 80 grade, No Hole, 7100199698, 50 discs per roll
5 × $32.26 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.46 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $12.14 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.74 -
×
3M 28142, Hookit Cloth Disc 900DZ, P100 J-weight, 5 in x NH, Die 500X, 7010361092
250 × $1.16
3M 05656, Stikit Low Profile Disc Pad, 6 inch, 7000120068
$59.40
Factory Stock, 7-10 Day Leadtime
3M Stikit Low Profile Abrasive Disc Back-up Pad provides secure attachment for a 3M Stikit Disc (sold separately) on a random orbital sander or other rotary tool. This lightweight, shock-resistant backup pad is constructed of firm density foam for sanding flat surfaces and has a tapered edge for applications where some flexibility is needed.
About Our Stikit System
Our 3M Stikit Low Profile Abrasive Disc Back-up Pad was designed for use with 3M Stikit abrasive discs. The 3M Stikit system was designed for convenient changes between abrasive grades or applications. Stikit abrasive discs come ready to use with a pressure sensitive adhesive coating on the backside so that attaching them to the hand block is as simple as pressing on a sticker. Yet they remove cleanly without adhesive residue left on the block.
Low Profile for Flattening and Leveling
The taper on 3M Stikit Low Profile Abrasive Disc Back-up Pad, either 10 or 15 degrees, helps it conform to small contours and get inside tight corners.
Beat Bumps in the Road
Some Stikit backup pads feature holes for enhanced dust extraction while others ? like 3M Stikit Low Profile Abrasive Disc Back-up Pad ? do not. Operators may opt for a backup pad without holes when working on substrates where loading or debris are not as much of a concern. The 6? diameter disc has a 3/8? thickness, which qualifies it as low profile. Low profile, hard density backup pads are good for flattening and leveling surfaces, because they tackle imperfections without yielding or deflecting. When you anticipate bumps in the road ? this backup pad is good to have on hand.
