-
×
Insize 1188-150AWL, DIGITAL BLADE CALIPER, 0-6"/0-150mm, built-in wireless, 6940561942606
1 × $229.69 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 79973 6" Dia. x 180 Grit Vacuum Hook-Face DynaCut Disc, 100/Box
100 × $1.16 -
×
Dynabrade 78752 2" x 1"-W242 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $3.86 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 16238, PPS Spray Gun Holder, 4 Gun, 7100158720
1 × $124.57 -
×
3M 26199, PPS Series 2.0 Lid, Standard/Large, 125 Micron Filter, 7100135628
25 × $44.31 -
×
Insize 3352-25AWL, HIGH PRECISION DIGITAL BLADE MICROMETERS/SNAP GAGE (built-in wireless), 0-25mm/0-1", .0002mm/.00001", 6940561982169
1 × $1,185.16
-
×
Dynabrade 91535 5" Dynacut Extreme Orange Premium Film Disc, 60 Grit, Hook & Loop, Vacuum Holes, 50/Box
1 × $44.57 -
×
3M 00264, Scotch-Brite Clean and Finish Roll, CF-RL, A/O Medium, 4 in x 30 ft, 7100141687
3 × $139.65 -
×
Dynabrade 79245 5" Dia. x 80 Grit A/O Vacuum PSA DynaCut Disc, 100/Roll
1 × $42.78 -
×
Standard Abrasives 827520, Industrial Scouring Hand Pad, 6 in x 9 in, 7000046756, 60 pads per case
1 × $81.71 -
×
Dynabrade 78744 1" x 1/8"-W215 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $6.75 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
Dynabrade 32012 Single Inlet
1 × $144.50 -
×
3M 72580, Scotch-Brite Surface Conditioning Roll, SC-RL, A/O Very Fine, 4 in x 4 ft, 7100191143
3 × $38.49 -
×
3M 20400, Cartridge Roll 747D, 3/8 in x 1-1/2 in x 1/8 in, 80 X-weight, 7100127589
100 × $1.16 -
×
3M 16353, Test Hood FT-14, 7000051788, 10 ea/Case
1 × $305.43
-
×
Dynabrade 61202 RaptorVac Pneumatic DrumVac Kit, Single Operator, General Purpose
1 × $2,268.04
3M 05556, Stikit Low Profile Disc Pad, 6 in x 3/8 in x 5/16-24 External, 7000119808
$56.60
Factory Stock, 7-10 Day Leadtime
3M Stikit Low Profile Abrasive Disc Back-up Pad provides secure attachment for a 3M Stikit Disc (sold separately) on a random orbital sander or other rotary tool. This lightweight, shock-resistant backup pad is constructed of firm density foam for sanding flat surfaces and has a tapered edge for applications where some flexibility is needed.
About Our Stikit System
Our 3M Stikit Low Profile Abrasive Disc Back-up Pad was designed for use with 3M Stikit abrasive discs. The 3M Stikit system was designed for convenient changes between abrasive grades or applications. Stikit abrasive discs come ready to use with a pressure sensitive adhesive coating on the backside so that attaching them to the hand block is as simple as pressing on a sticker. Yet they remove cleanly without adhesive residue left on the block.
Low Profile for Flattening and Leveling
The taper on 3M Stikit Low Profile Abrasive Disc Back-up Pad, either 10 or 15 degrees, helps it conform to small contours and get inside tight corners.
Beat Bumps in the Road
Some Stikit backup pads feature holes for enhanced dust extraction while others ? like 3M Stikit Low Profile Abrasive Disc Back-up Pad ? do not. Operators may opt for a backup pad without holes when working on substrates where loading or debris are not as much of a concern. The 6? diameter disc has a 3/8? thickness, which qualifies it as low profile. Low profile, hard density backup pads are good for flattening and leveling surfaces, because they tackle imperfections without yielding or deflecting. When you anticipate bumps in the road ? this backup pad is good to have on hand.
