-
×
Dynabrade 64674 Filter Cartridge
1 × $75.74 -
×
Dynabrade 57532 Non Regulator Plug
1 × $25.78 -
×
Dynabrade 51959 Governor Ass'y.- 17K RPM
1 × $95.48
-
×
Dynabrade X52 5" (127 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, PSA
1 × $223.00 -
×
Dynabrade 57531 Non Regulator Plug
1 × $35.56 -
×
Dynabrade 58090 Housing for 10288
1 × $201.07
-
×
Dynabrade 50789 Shroud 3_ Vac. Coated Abrasive Disc Sander
1 × $79.84 -
×
Dynabrade 56315 3" x 4-1/4" Non-Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
1 × $32.01 -
×
Dynabrade 67263 Contact Wheel Ass'y
1 × $194.29
-
×
Dynabrade 56195 5" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
1 × $30.66 -
×
Dynabrade 45237 Sleeve, for 48531, 15K RPM
1 × $43.44
-
×
Dynabrade 95186 Nut
1 × $2.07
-
×
Dynabrade 42735 Brush Set Assembly
1 × $63.36 -
×
Dynabrade 12119 Retaining Ring
1 × $5.49
-
×
Dynabrade 97172 Ring-Snap
1 × $2.07
-
×
Dynabrade 89242 3-1/2" W x 15-1/2" L Medium NWN DynaBrite Premium Belt
10 × $43.99 -
×
Dynabrade 40375 Rubber Drive Wheel
1 × $74.63 -
×
Dynabrade 64000 SuperFinisher, 115 Volts (AC), 1 Phase, 60 Hz
1 × $19,371.00 -
×
Dynabrade 96005 - 1/4" Male Plug with 3/8" NPT Male Thread
1 × $10.83 -
×
Dynabrade 67229 Contact Arm Assy
1 × $216.88
-
×
Dynabrade 57262 Shaft Balancer
1 × $46.00
-
×
Dynabrade 90255 3/4" W x 18" L 220 Grit Ceramic DynaCut Belt, 50/pack
50 × $1.45 -
×
Dynabrade 78007 1/2" W x 12" L Medium Non-Woven DynaBrite Belts, 10/pack
10 × $5.03 -
×
Dynabrade X52H 5" (127 mm) Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander, .3 HP, 12,000 RPM, 3/32" Orbit, Hook-Face
1 × $223.00
3M 03612, Stripe Off Wheel, 4 in x 5/8 in, 7010363417, 5 per case
$72.01
Factory Stock, 7-10 Day Leadtime
Our 3M Stripe Off Wheel was designed for high-speed removal of vinyl, decals, tape, graphics and double sided molding striping and trim. We engineered this wheel to help operators achieve effective and efficient decal removal without damaging the surface below.
Our 3M Stripe Off Wheel moves in a rapid, circular motion to remove unwanted decals and stripes. The solid molded wheel rids the substrate of decals with friction, instead of abrasives, thereby preventing scratching and damage to the substrate. The wheel can be used at a Max RPM of 4,000. Operators should note that it is important not to exceed the maximum operating speed, because it may compromise the product’s performance. Additionally, operators should ensure that the substrate is not heat sensitive, as repeated friction will create heat.
Trust our 3M Stripe Off Wheel to cleanly and efficiently remove unwanted decals without substrate damage.
