3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

Dynabrade 90451 1/2" W x 24" L 220 Grit A/O DynaCut Belt, 50/pack
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
Dynabrade 56180 5" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 94897 Re-usable Compression Fitting Ass'y (for 8mm Hose)
Dynabrade 96529 Tune-Up Kit for .7 hp Motor, Front and Rear Exhaust
3M 53521, Tartan Box Sealing Tape 305, Clear, 72 mm x 100 m, 24 Rolls/Case, 7100240710
Dynabrade 89242 3-1/2" W x 15-1/2" L Medium NWN DynaBrite Premium Belt
Dynabrade 94821 - 3/8" ID, 10' Long Air Hose Assembly, Female/ Male Fitting Ends Included
Dynabrade 92153 1/2" W x 12" L 80 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
Dynabrade 07107 Vane Set (5pk)
Standard Abrasives 706221, Aluminum Oxide Handy Roll, P80 J-weight, 1 in x 50 yd, 7010301272
Dynabrade 79076 3/8" W x 13" L 120 Grit A/Z DynaCut Belt, 50/pack
Dynabrade 80057 Motor Brush Set, 110/120V-60 Hz
Dynabrade 57571 3-1/2" Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, 3/16" Orbit
Dynabrade 25234 Vane Set (4pk)
Dynabrade 01024 O-Ring
Dynabrade 95886 Washers For Vacuum Shroud (57737)
Dynabrade 90614 3" W x 10-11/16" L 80 Grit A/O DynaCut Belt, 10/pack
Dynabrade 78049 1/2" W x 24" L Coarse NWN DynaBrite Belt, 10/pack
Dynabrade 78116 3/4" W x 34" L Medium NWN DynaBrite Belt, 10/pack
Dynabrade 21457 ND3071, Red Plastic Cover
Dynabrade 15101 Tension Arm (for Mini Dynafile II)
Dynabrade 39200 2" Type C, Roto Peen Flaps
Dynabrade 90411 1/8" W x 24" L 220 Grit A/O DynaCut Belt, 50/pack
Dynabrade 40321 Dynafile II Abrasive Belt Tool Versatility Kit
Dynabrade 79195 3-1/2" W x 15-1/2" L 36 Grit DynaCut Premium Ceramic Belt, 10/pack
Dynabrade 51458 6"-8" (152 mm-203 mm) Dia. Right Angle Two-Hand Rotary Buffer
Dynabrade 82563 1/8" W x 18" L 120 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 90292 1/2" W x 18" L Medium NWN DynaBrite Premium Belts, 10/pack
Dynabrade 56323 3-7/8" x 5-5/8" Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap
Dynabrade 11011 Idler Arm Assembly
Dynabrade 96425 Screws For Vacuum Shroud (57737) 
