A Venture Tape Unlike Any Other
A high quality polyethylene cloth tape coated with a natural rubber pressure sensitive adhesive system, our 3M™ Venture Tape™ Metallized Cloth Duct Tape 1502 has high tack, high peel and adheres to corners and irregular surfaces. The polyethylene-coated, cloth-reinforced backing resists moisture and humidity while the natural rubber adhesive gives you instant stick and long-term hold. The tape tears easily, across or down, without curling. It measures 11 mil thick and performs well in many HVAC applications.
Recommended Applications
- Sealing non-heated ducts
- Taping/splicing insulation
- Vapor sealing
- Capping pipe
- Securing conduit ends
- Temporary repair
- Hanging polyethylene drapes
- Protecting against light sandblast overspray
Built to Stick
3M’s family of rugged cloth and duct tapes adheres to most surfaces for applications ranging from bundling to moisture proofing, sealing to splicing, reinforcing to hanging poly drapes. Available in a variety of colors and strengths, they’re known best for their hand tearability, high tensile strength and conformability.

Dynabrade 51815 .4 hp Trim Router Replacement Air Motor
Dynabrade 53686 Muffler Cap
Dynabrade 78655 3/8" Dia. x 1" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 180 Grit, 100/pack
Dynabrade 61203 RaptorVac Pneumatic DrumVac Kit, Single Operator, For Use With Tools
Standard Abrasives 712354, A/O Straight Cartridge Roll, 1/4 in x 2 in x 1/8 in 120, 7100092341
Dynabrade X52ESD1 - 5" Extreme ROS, Central-Vac, 3/32" Orbit w/ESD Hose Assembly
Dynabrade 53682 Gasket
Dynabrade 78328 3" x 1" x 1/4 Shank, 60 Grit, Dynabrite Interleaf Wheel, 10/pack
Dynabrade 93251 8" Dia. x 1/2" Center Hole, 320 Grit, A/O, Arbor-Mount Sanding Star
Dynabrade 62640 Working Air HEPA Filter/Intake
Dynabrade 96529 Tune-Up Kit for .7 hp Motor, Front and Rear Exhaust
Dynabrade 78456 1" x 1" x 1/4 Shank, 120 Grit, Dynabrite Interleaf Wheel, 10/ Pack
Dynabrade 59038 5" Dia. Self-Generated Vacuum Dynorbital-Spirit Random Orbital Sander, 3/32" Orbit
Dynabrade 52294 .7 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 20,000 RPM, 1/4" Collet
Dynabrade 91438 1/2" W x 24" L 80 Grit A/O DynaCut Belt, 50/pack
Dynabrade 96414 [1-1/4" Thread - 1-1/2" Non-Thread], Non-Conductive Vacuum Hose Cuff
Dynabrade 90046 6" Dia. Polishing Pad, Foam, Flat Face
Dynabrade 79052 3" W x 24" L 80 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 78599 3/8" Dia. x 2" W x 1/8" Center Hole, 80 Grit, 100/pack
Dynabrade 15348 Contact Wheel Ass'y, 2" Dia. x 1" W x 5/8" I.D., Standard Face, 70 Duro Rubber
Dynabrade 96314 Wrench, 4 mm Double Open-End
Dynabrade 11518 Rubber Drive Wheel 
