-
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 01021, Scotch-Brite Clean and Strip Unitized Wheel, CS-UW, 7S Extra Coarse, 4 in x 1 in x 1/4 in, 7000120868
5 × $55.43 -
×
3M 50728, Hookit Purple+ Curved Adapter Set Multi Hole, 70 mm x 127 mm, 7000032209
1 × $120.90 -
×
3M 26110, PPS Series 2.0 Adapter, Type S24, 1/4 Female, R-Angle 18
Thread NPS, Side Cup Mount, 7100135940
1 × $38.43 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 47184, Polyurethane Adhesive Sealant 550FC Fast Cure, White, 350 mL Sausage Pack, 7100197992, 12/Case (Use with 400A-2K APR, Nozzles Not Included)
12 × $10.64 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
1000 × $0.58 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series with Brake, 40,000RPM, 33444
2 × $975.00 -
×
3M 77199, Scotch Brite Roloc Deburr & Finish PRO Unitized Wheel, DP-UR, 8C Coarse+, TR, 3 in x 1/4 in x NH, 7100109110
40 × $13.01 -
×
3M 26137, PPS Series 2.0 Adapter, Type S41, Trapezoidal Thread - QCC, 7100135947
1 × $25.96 -
×
3M 26618, Accuspray Atomizing Head Refill Pack for 3M PPS Series 2.0,Clear, 1.8 mm, 7100141416 (4 Nozzles/Kit)
6 × $31.20
Standard Abrasives 522218, Quick Change Silicon Carbide 2 Ply Disc, 80, TSM, Black, 1 in, Die QS100NM, 7010368187, 50/inner, 200/case
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
