-
×
Dynabrade 96674 Tune- Up Kit for 18150
1 × $92.32 -
×
Dynabrade 92298 4" Dia. RED-TRED Eraser Disc Backing Plate
1 × $41.41 -
×
Dynabrade 58600 Dual-Grip Random Orbital Sander for ESD, 6" (152 mm) Dia., Central Vacuum
1 × $675.00 -
×
Dynabrade 49135 Angle Head Drill, Central Vacuum
1 × $1,318.00 -
×
Dynabrade 79967 5" Dia. x 60 Grit A/O Non-Vacuum PSA DynaCut Disc, 100/Box
1 × $54.88 -
×
Dynabrade 21482 4016, Pad Shaft
1 × $20.82
-
×
Dynabrade 90442 1/2" W x 30" L Coarse NWN DynaBrite Premium Belt, 10/pack
10 × $10.06 -
×
Dynabrade 52774 3/8" Reversible Drill, .5 HP, Rear Exhaust, 950 RPM
1 × $915.45 -
×
Dynabrade 06061 Set Screw
1 × $7.16
-
×
Dynabrade 91750 DynaMesh 11" 120 Grit Hook & Loop Discs, 25 per box
1 × $146.58 -
×
Dynabrade 57983 Base Plate Door
1 × $12.69
Standard Abrasives 522519, Quick Change Silicon Carbide 2 Ply Disc, 100, TSM, Black, 3 in, Die QS300VM, 7010301392, 50/case
$0.88
Choose a Standard Abrasive Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is a good choice for finishing smaller surface areas of non-ferrous metals such as aluminum or titanium, as well as stainless steel, fiberglass, plastic, and glass. Coarser grits are typically used for grinding, deburring and blending applications on these substrates.
Quick Change Convenience
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
