-
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $27.52 -
×
3M 19721, Nitrile High Performance Rubber and Gasket Adhesive 847, Brown, 1 Quart Can, 7000042735, 12/case
12 × $71.97 -
×
Insize 7341-4S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes),.180-.228", 6928640360732
1 × $39.25 -
×
3M 85611, Vinyl Tape 471, Blue, 3/8 in x 36 yd, 5.2 mil, 7100049359
96 × $10.51 -
×
ACS Diamond Grinding Disc, 4-1/2" Dia. X 5/8"-11 Center Hub Thread, Type 29, 36 Grit
2 × $40.00 -
×
3M 86992, Diamond Disc, 3" Roloc, 674W, 120 Mesh, TR, 7100143477, Box of 5
1 × $59.95 -
×
Insize 6302, MICROMETER STAND, 6928640392467
1 × $1,184.47
-
×
Dynabrade 90875 2" Dia. Super Fine NWN DynaBrite Locking-Type Disc, 25/pack
25 × $43.25 -
×
3M 14593, Scotch-Brite Cut and Polish Disc, 3" x 1-1/4" x 1/4" A Medium, D5, 7000045941, Box of 10
10 × $18.37 -
×
3M 47083, Cubitron II Stikit Film Disc 775L, 320+, 5 in x NH, Linered w/Tab, Die 500X, 7100145365, 250 per case
250 × $1.15 -
×
Norton 66261014792 - 2" Medium Grade Aluminum Oxide Bear-Tex Speed-Lok High Strength Maroon TR Non-Woven Abrasive Disc 160 Each
160 × $2.04 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $9.21 -
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22
-
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.64
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
