-
×
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
25 × $4.53 -
×
Dynabrade 78127 3" Dia. Medium NWN VT DynaBrite Locking-Type Disc, 25/pack
25 × $3.91 -
×
3M 05068, Cubitron II Stikit Film Disc 775L, 400+, 5 in x NH, Linered w/Tab, Die 500X, 7100145364, 250 per case
250 × $1.15 -
×
Insize 7232, SCRIBER, 6928640320088
1 × $7.01 -
×
Insize 0120-IM24, INDUCTIVE MOISTURE METER, 0~100%, 6974029776588
2 × $207.68
-
×
3M 45555, Cubitron ll Cloth Belt 784F, 60+ YF-weight, 3/4 in x 18 in, Fabri-lok, Single-flex, 7100119295, 200 per case
200 × $2.72 -
×
Insize 3101-150E, DIGITAL OUTSIDE MICROMETER, IP65, 5-6"/125-150mm, 6928640326837
1 × $385.58
-
×
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
500 × $0.68 -
×
Norton 66261014792 - 2" Medium Grade Aluminum Oxide Bear-Tex Speed-Lok High Strength Maroon TR Non-Woven Abrasive Disc 160 Each
160 × $2.04 -
×
3M 94443, Speedglas G5-02 Inside Protection Plate with Integrated Airflow Deflector 08-0200-50, 2 ea/Case, 7100241573
1 × $47.55
-
×
Insize 4807, ANGLE GAGE SET, 6928640319341
1 × $64.73
-
×
Insize 6144, ACCESSORY SET FOR DIGITAL CALIPERS, 6928640380839
2 × $83.88
-
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63
-
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $27.52 -
×
Dynabrade 77759 4-1/2" Dia. x 7/8" Center Hole, 80 Grit, Z/A, Type 27, DynaCut Flap Disc W/Fiberglass, 10/pack
10 × $4.49 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.64
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
