-
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $27.52 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $1.05 -
×
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
18 × $43.98 -
×
Insize 6302, MICROMETER STAND, 6928640392467
1 × $1,184.47 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $92.81 -
×
3M 26109, PPS Series 2.0 Adapter, Type S23, 1/4 Female, 18 Thread NPS, 7100135941
8 × $27.52 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22
-
×
3M 26006, PPS Series 2.0 Adapter, Type S5, 12 mm Male, 1.5 mm Thread, 7100135831
1 × $27.52 -
×
3M 55657, Stikit Film Disc w/Tab 375L, P240, 6 in x NH, Die 600Z, 7100106615, 250 per case
250 × $0.70 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63
-
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Standard Abrasives 265024, Buff and Blend Cross Buff HP, A/O Very Fine, 1 in x 3/8 in x 2 Ply x 8-32, 7010310168
10 × $1.71 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.55 -
×
3M 25774, Scotch-Brite Roloc Surface Conditioning Disc, TSM, 1-1/2 in x NH A MED, 7100014112, 200 per case
200 × $1.06 -
×
Insize 4120-18N, METRIC THREAD RING GAGE, NO GO, M18x2.5, 6928640341816
1 × $57.62
-
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.63
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$23.53
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
