-
×
Insize TLP-300H-C2, BT50/BT40 converter, 6928640377259
1 × $1,203.36 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $963.87 -
×
3M 05048, Cloth Belt 384F, 80+ XF-weight, 1 in x 12 in, Fabri-lok, Full-flex, 7100141432, 200 per case
200 × $1.57 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
2 × $192.76 -
×
3M 95412, Lead Foil Tape 420, Dark Silver, 3/4 in x 36 yd, 6.8 mil, 7000029006
12 × $103.27 -
×
Dynabrade 01480 Vane Set (4pk)
1 × $24.36 -
×
Insize 1179-1000, DIGITAL RTJ RING GROOVE CALIPER, inside diameter of RTJ ring groove .6-40"/15-1000mm, outside diameter of RTJ ring groove 1.2-40"/30-1000mm, 6928640394409
1 × $2,201.72
-
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
Insize TLP-P340-R1, BT30 ROD, 6940561981865
1 × $1,754.58
-
×
Dynabrade 14230 Rubber Drive Wheel
1 × $121.55 -
×
Insize TLP-300H, TOOL PRESETTER (BASIC TYPE), 6928640376443
1 × $11,230.10
-
×
3M 80485, Cloth Belt 777F, 80 YF-weight, 1/8 in x 24 in, Fabri-lok, Single-flex, 7000118436, 200 per case
200 × $2.20 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $400.59 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
3M 95307, Lead Foil Tape 421, Dark Silver, 3/4 in x 36 yd, 6.3 mil, 7000049079
12 × $84.01 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
1 × $531.79 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 30u
12 × $7.60 -
×
Standard Abrasives 704491, Cartridge Roll Mandrel, 3/16 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-15, 7000121768
5 × $4.88 -
×
3M 72074, Organic Vapor/Chlorine/Hydrogen Chloride/Sulfur Dioxide/High Efficiency Cartridge 453-03-01R06, AEP3, 7000131720, 2 Packs/Case
1 × $359.09
3M 37350, Versaflo Single Station Battery Charger Kit TR-641N/37350 (AAD), 7100035838, 1 EA/Case
$283.11
Factory Stock, 7-10 Day Leadtime, Priced Per Case
The TR-641N Battery Charger Kit is a complete single station battery charger for TR-600 Series PAPRs. It consists of a TR-640 Cradle and a TR-941 Power Supply.
The TR 641N Battery Charger Kit is a complete single station battery charger for TR 600 Series PAPRs. It consists of a TR 640 Cradle and a TR 941 Power Supply. The TR 641N battery charger will charge a TR 630 standard capacity battery or TR 632 high capacity battery in less than 4 hours. The TR 641N charger will charge one battery at a time. Batteries may be stored on the charger, fully charged, ready for immediate use.
