Flexible Backing Conforms to Duct Piping Systems
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions.
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CWÂ is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.
Recommended Applications
- Closure system on all service jacket (ASJ) faced duct piping systems
- Vapor seal on ASJ faced ductboard and pipe insulation
Cold Weather Performance
3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.
Efficient Long-Term Installation
3Mâ„¢ Venture Tapeâ„¢ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.
The Science of Better Adhesion from 3M
Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

Dynabrade 51337 Housing for Model 51330
Dynabrade 51305 .5 hp Straight-Line Die Grinder, Rear Exhaust, 18,000 RPM, 1/4" Collet
Dynabrade 52100 .5 hp Straight-Line Die Grinder, Rear Exhaust, 950 RPM, 1/4" Collet
Dynabrade Nitro Series 50218 Nitro Tool .5hp Die Grinder Kit
Dynabrade 56236 8" Dia. Non-Vacuum Disc Pad, Hook-Face, Short Nap
Dynabrade 11337 Contact Arm Ass'y, 5/16" Dia. x 5/8" W, Steel Wheel, with 1/2" W Platen
Dynabrade 50083 Spacer
Dynabrade 11300 Contact Arm Ass'y, 1/4" Dia. x 3/8" W, Steel Wheel, Polish Turbine Blades
Dynabrade 56870 3-1/2" Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander, 3/8" Orbit
Dynabrade 93332 Carbide Burr, 1/4" Dia., SC-1 D/C Burr, Cylinder-Radiused End, 5/8" Flute L, 1/4" Shank
Dynabrade 54403 3" Dia. Extended Right Angle Disc Sander, Rear Exhaust, .7 HP, 18,000 RPM, 3/8"-24 Thread
Dynabrade 51971 Planetary Casing
Dynabrade 51360 Grip
Dynabrade 58075 4" W x 4-1/2" L Dynabug "Model T" Orbital Sander, Self-Generated Vacuum, 20,000 RPM, 3/32" Orbit, Hook-Face
Dynabrade 01721 Rear Bearing Plate
Dynabrade 51742 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 3mm Collet, w/ Mounted Stem
Dynabrade 52418 3" (76 mm) Straight-Line Central Vacuum Flush Cut-Off Wheel Tool
Dynabrade 48371 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
Dynabrade 53531 Cone or Plug Grinder (Single Extension), 18,000 RPM, 3/8"-24 Male Thread Spindle
Dynabrade 07153 Air Control Ring
Dynabrade 40014 Housing Assembly, Dynafile II
Dynabrade X3252V - 3" Mini Extreme & 5" Extreme Random Orbital Sander, Vac, Combo Kit 12,000 RPM, 3/32" Dia., Rear Exhaust
Dynabrade 30721 Face Plate, Roloc Mount, 1-1/4" Pad
Dynabrade 79506 1/4" W x 18" L Premium Very Fine Plus NWN DynaBrite Belt, 10/pack
Dynabrade 78647 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Z/A, 120 Grit, 100/pack
Dynabrade 47201 .4 hp Straight-Line Die Grinder, Rear Exhaust, 3,200 RPM, 1/4" Collet
3M DP16, Scotch-Brite Driving Pad, 16 in , White, 7000126477 
