-
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $25.96 -
×
Dynabrade 55064 3/8"-24 Female 5/8"-11 Male, 1" Length
1 × $39.90 -
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $3.79 -
×
3M 51033, Roloc Disc 361F, 36 YF-weight, TSM, 3 in, Die RS300VM, 7000148150
200 × $1.55 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.75 -
×
3M 45021, Diamond Grade DG3 Reflective Digital Sheeting 4081UDS, Fluorescent Yellow, 24 in x 50 yd, 1 Roll/Case, 7100282401
1 × $1,631.05 -
×
3M 87670, High Intensity Prismatic Reflective Sheeting 3930DS White forDigital Printing, 24 in x 50 yd, 7100116165
1 × $641.72
-
×
Insize 0110-1125, ANEMOMETER, 6974029776595
1 × $178.56
-
×
Dynabrade 54039 3/8"-24 Female 5/16"-24 Female, 1" Length
1 × $95.48 -
×
3M 26000, PPS Series 2.0 Spray Cup System Kit, Standard (22 fl oz, 650
mL), 200 Micron Filter, 7100134641
1 × $132.50 -
×
Insize 3101-200E, DIGITAL OUTSIDE MICROMETER, IP65, 7-8"/175-200mm, 6928640326851
1 × $461.83
-
×
3M 20909, PSA Cloth Disc 348D, 80 X-weight, 2 in x NH, Die 200P, 7000118873
200 × $0.81 -
×
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
200 × $1.16 -
×
3M 05067, Cubitron II Stikit Film Disc 775L, 400+, 6 in x NH, Linered w/Tab, Die 600Z, 7100145474, 250 per case
250 × $1.53 -
×
Insize 2197, LARGE RANGE DIGITAL RADIUS GAGE, R1(4-590"/100-1500mm), R2(4-590"/100-1500mm), 697409778087
1 × $4,148.69
-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Dynabrade 97103 3/8"-24 Female, 1/2"-20 Male, 2" Length
1 × $151.00 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $9.87
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
