-
×
3M 26137, PPS Series 2.0 Adapter, Type S41, Trapezoidal Thread - QCC, 7100135947
2 × $25.96 -
×
Dynabrade 13016 Arbor Assembly 1/2"-20 Female Thread - 1/2" Male Thread
1 × $118.65 -
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22 -
×
3M 82609, Hot Melt Adhesive 3738PG, Tan, 1 in x 3 in, 7100020456, 22 lb/Case
22 × $22.25 -
×
Insize 1150-1000, ELECTRONIC HEIGHT GAGE, 0-40"/0-1000mm, 6928640302695
1 × $2,177.46
-
×
3M 08217, Universal Adhesive Clear - 3, 200 mL Cartridge, 7100006285, 6 per case
6 × $70.33 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $522.56 -
×
3M 62813, Adhesive Sealant 740 UV, Gray, 290 mL Cartridge, 7100111087, 12 per case
12 × $16.25 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
2 × $183.85 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.87 -
×
3M 26054, PPS Series 2.0 Adapter, Type S18, 3/8 Female, 18 Thread NPS,
4 per case
1 × $25.96 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $83.00 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
200 × $3.87 -
×
Dynabrade 77763 4-1/2" Dia. x 7/8" Center Hole, 60 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
10 × $95.70 -
×
3M 26116, PPS Series 2.0 Adapter, Type S25, 1/4 Female, 19 Thread BSP, 7100135957
1 × $25.96 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63
-
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.45
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
