-
×
3M 16615, Accuspray Atomizing Head, Blue, 1.2 mm, 7100086837 (4 Nozzle/Kit)
6 × $32.31 -
×
3M 20360, Scotch-Weld Epoxy Adhesive 2216, Gray, Part B, 5 Gallon Drum (Pail), 7000046360
5 × $447.51 -
×
3M 32518, Cloth Belt 341D, P120 X-weight, 9 in x 48 in, Film-lok, Single-flex, 7010307962, 20 per case
20 × $19.65 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
500 × $4.29 -
×
3M 29828, Sanding Screen, 100 Grit, 19 in x NH, 7100160248
12 × $9.25 -
×
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
10 × $13.32 -
×
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
200 × $1.16 -
×
3M 04281 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Very Fine, 4 in x 132 in, 7010292398
5 × $106.31 -
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $19.92 -
×
3M 45019, Diamond Grade DG3 Reflective Digital Sheeting 4081UDS, Fluorescent Yellow, 36 in x 50 yd, 1 Roll/Case, 7100282389
1 × $2,446.58 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.69 -
×
3M 43060, Aura Particulate Respirator 9205+, N95, 7100232219, 240 ea/Case
1 × $288.77 -
×
3M 54295, Particulate Filter 2096, P100, with Nuisance Level Acid Gas Relief, 7000002048, 100 EA/Case
1 × $582.48 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.38 -
×
3M 03123, Pro Grade Precision Edge Detailing Dual Angle Sanding Sponge, 24302TRIP-XFDA, 2-7/8 in x 4.5 in x 1 in, X-Fine, 7100170066
12 × $4.01 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.45
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
