-
×
3M 64469 Scotch-Brite Durable Flex Belt, DF-BL, A/O Fine, 3/4 in x 18 in, 7100105418
20 × $12.61 -
×
Insize 3205-72, OUTSIDE MICROMETER WITH EXTENSION ANVIL COLLAR, 64-72", 6928640327490
1 × $3,195.57 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
3M 03601, Plastic Emblem and Trim Adhesive, 1 oz, 7100045880, 24 per case
24 × $3.65 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 120" 125U
16 × $27.50 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,325.62 -
×
3M 50010, VentureClad Insulation Jacketing Tape 1577CW-WME, White, 99 mm x 13.7 m, 7010379907
12 × $46.36 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
Dynabrade 78318 2" Dia. x 1" W x 1/4" Shank, Very Fine, NWN DynaBrite Wheel, 10/pack
10 × $13.39 -
×
Insize 0110-1125, ANEMOMETER, 6974029776595
1 × $178.56
-
×
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202
4 × $351.15 -
×
3M 87053, Cubitron II Stikit Film Disc 775L, 150+, 6 in x NH, Linered w/Tab, Die 600Z, 7100075207, 250 per case
250 × $1.36 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.62 -
×
Insize 1151-600AE, DIGITAL HEIGHT GAGE, 0-24?/0-600mm, 6940561979695
1 × $1,367.30
-
×
3M 00581 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2-1/2 in x 60 in, 7010329198
10 × $39.27 -
×
3M 35829, Hookit Dust Extraction Flexible Sanding Block Kit, 7100259119
10 × $100.94 -
×
3M 54763, SandBlaster Right Angle Grinder Multi-Layer Disc, 4 1/2 in 36g 9678, 7010384119
5 × $7.27
-
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.30 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $34.73
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
