-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.29 -
×
3M 42819, Electrically Conductive Double-Sided Tape 5113DFT-50, Grey, 210 mm x 10 m, 4 Rolls/Case, 7100313598
4 × $178.09 -
×
3M 60230, Scotch-Brite Hookit Cut and Polish Disc, CP-HA, A/O Medium, 5 in x NH, 7000121099
40 × $4.57 -
×
3M™ 07011, Supplied Air Respirator Hose W-9435-50/07011(AAD), 7000005373, 1 EA/Case
2 × $286.61 -
×
Insize 1179-300, DIGITAL RTJ RING GROOVE CALIPER, inside diameter of RTJ ring groove .4-12"/10-300mm, outside diameter of RTJ ring groove 1-12"/25-300mm, 6928640302565
1 × $571.01
-
×
Insize 6301, MICROMETER STAND, 6928640307300
1 × $38.90
-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
3M 74833, Cushion-Mount Plus Plate Mounting Tape E1520H, Purple, 18 in x 25 yd, 20 mil, 7100051377
1 × $605.76
-
×
Insize 4807, ANGLE GAGE SET, 6928640319341
1 × $64.73
-
×
Dynabrade 78320 3" Dia. x 1" W x 1/4" Shank, Medium, NWN DynaBrite Wheel, 10/pack
10 × $16.98 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 45u
12 × $7.60 -
×
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
200 × $1.99 -
×
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
24 × $17.79 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,713.82
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
