-
×
3M 10119, Synthetic Steel Wool Pad 10119NA, 0000 Super Fine, 7000126181
36 × $2.69 -
×
Dynabrade 91427 1/4" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Standard Abrasives 875501, Buff and Blend GP Mounted Flap Brush, Medium, 3 in x 2 in x 1/4 in, 7000122218
5 × $24.64 -
×
Standard Abrasives 850034, Unitized Wheel Steel Screw Mandrel, 7/8 in x 1/4 in Shank, 7000121879
1 × $8.53 -
×
Insize 3293-061, CAN SEAM MICROMETER, 0-.5", for steel cans, 6928640328497
1 × $140.37 -
×
Dynabrade 91429 1/2" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
Dynabrade 92208 1/8" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.02
-
×
Dynabrade 02084 Angle Housing Assembly,Steel, Rear Exhaust
1 × $235.71 -
×
3M 01490, Stikit Gold Disc Roll, 8 in, P150, 7010292229, 125 discs per roll
4 × $167.94 -
×
Insize 7262-300, OUTSIDE SPRING CALIPER, 12", 6928640319693
1 × $29.03
-
×
Insize 7332, SPINDLE LIFT KNOB, 6928640312649
1 × $4.60
-
×
Insize 0130-L110, LIGHT METER (BASIC TYPE), 6974029776564
1 × $65.70
-
×
3M 96968, Cartridge Roll 341D, 60 X-weight, 1/4 in x 1-1/2 in x 1/8 in, 7100080025
100 × $0.57 -
×
3M 74815, Cushion-Mount Plus Plate Mounting Tape E1320, Yellow, 18 in x 25 yd, 20 mil, 7000042751
1 × $605.76
-
×
ACS 2" Diamond Roloc Disc, 60 Mesh, W/ Plastic Button
1 × $15.00 -
×
Dynabrade 13061 Arbor Assembly 3/8"-24 Female Thread
1 × $143.62 -
×
Standard Abrasives 705196, A/O Straight Cartridge Roll, 3/8 in x 1 in x 1/8 in 60, 7100102803
100 × $0.38 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
Standard Abrasives 712731, A/O Full Taper Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 100, 7100102809
100 × $0.82 -
×
Dynabrade 98263 3/8" NPT Male Plug
1 × $24.50 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $522.56
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
