-
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.62 -
×
Insize 4807, ANGLE GAGE SET, 6928640319341
1 × $64.73 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $1.01 -
×
3M 64283, Cubitron II Stikit Film Disc 775L, 220+, 5 in x NH, Linered w/Tab, Die 500X, 7100075692, 250 per case
250 × $0.96 -
×
Insize 6302, MICROMETER STAND, 6928640392467
1 × $1,184.47
-
×
3M 03442, Amber Lens Repair Tape, 03442, 1.875 in x 60 in, 24 rolls per case, 7100015031
24 × $1.85
-
×
3M 49688, PSA Cloth Disc 348D, 80 X-weight, 10 in x NH, Die 1000C, 7000118869
10 × $5.64 -
×
3M 83497, Hookit Marine Fairing Board, Rigid, 4 1/2 in x 30 in, 7000045684
1 × $87.91 -
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
3M 26053, PPS Series 2.0 Adapter, Type S14, 7/16 Male, 14 Thread UNC, 7100135932
4 × $25.96 -
×
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
20 × $17.78 -
×
3M 16612, Accuspray Atomizing Head, Orange, 1.4 mm, 7100017731 (4 Nozzles/Kit)
6 × $31.93 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.69 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,713.82
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
