-
×
3M 97979, Hi-Strength 94 ET Cylinder Spray Adhesive, Clear, Large Cylinder (Net Wt 26.2 lb), 7000144615
1 × $486.90 -
×
ACS-CP Curved Edge Flap Disc, 4-1/2" Dia. X 5/8"-11 Center Thread, 60 Grit
1 × $10.50 -
×
3M 45026, Diamond Grade DG3 Reflective Digital Sheeting 4084UDS, Fluorescent Orange, 30 in x 50 yd, 1 Roll/Case, 7100282400
1 × $2,038.81 -
×
3M 62860, Flexomount Plate Mounting Tape 411DL, Gray, 18 in x 36 yd, 15 mil, 7000028875
1 × $862.09
-
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
8 × $25.96 -
×
Insize 2197, LARGE RANGE DIGITAL RADIUS GAGE, R1(4-590"/100-1500mm), R2(4-590"/100-1500mm), 697409778087
1 × $4,148.69
-
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22
-
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 75U
4 × $57.10 -
×
Insize 6300, MICROMETER STAND, 6928640307294
1 × $51.04
-
×
Insize 1147-200, DIGITAL DEPTH GAGE WITH MOUNTING HOLES FOR EXTENSION BASE, 0-8"/0-200mm, 6928640303074
1 × $188.89
-
×
ACS Diamond Cloth Belt, CX1250 1" X 49" 125U
6 × $29.95
-
×
3M 42814, Electrically Conductive Single-sided Tape 3304BC-S, Black, 25 mm x 10 m, 12 Rolls/Case, 7100313593
1 × $22.60
-
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
3M 36876, Self-Stick Liquid Protection Fabric, Blue, 4 in x 300 ft perroll, 7100169348, 6 Rolls Per Pack
1 × $555.70 -
×
Insize 7232, SCRIBER, 6928640320088
2 × $7.01
-
×
3M 33440, Cubitron II File Belt, 33440, 80+, 10 mm x 330 mm (3/8 in x 13 in), 7100033195, 10 belts per carton, 5 cartons per case
50 × $24.66 -
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $3.79 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $87.56
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
