-
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Insize 0120-IM24, INDUCTIVE MOISTURE METER, 0~100%, 6974029776588
1 × $207.68 -
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
3M 28863, Finesse-it Knit II Buffing Pad, 28863, 3 in, 1/2 in Pile Height, 10/Bag, 50 ea/Case, 7100081888
50 × $5.97
-
×
Dynabrade 95676 1/4" Female Coupler with 1/4" Male Plug Assembly
1 × $31.48 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Insize 1185-150AWL, DIGITAL OUTSIDE POINT CALIPER, 0-6"/0-150mm, built-in wireless, 6940561942514
1 × $264.28
-
×
3M 82603, Hot Melt Adhesive 3779 TC, Amber, 5/8 in x 2 in, 7000000890, 11 LBS/Case
11 × $64.23 -
×
ACS Diamond Wheel, 1A1, 3" X 1" X 7/8", Straight 1/2", DD SD80 R75 B10-1/2
1 × $250.00 -
×
Insize 7332, SPINDLE LIFT KNOB, 6928640312649
1 × $4.60
-
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.78 -
×
Dynabrade 77794 4-1/2" Dia. x 7/8" Center Hole, 80 Grit, Type 29, Ceramic DynaCut Flap Disc, 10/pack
10 × $6.34 -
×
Insize 7231, SCRIBER, 6928640320071
1 × $6.59
-
×
Insize 7230, SCRIBER, 6928640320064
1 × $6.77
-
×
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
1 × $98.00 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $811.46
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
