-
×
3M 16312, PPS Lid & Liner Kit, Midi (13.5 fl oz), 125 Full Diameter
Micron Filter, 50 Lids & Liners per kit, 7100018936
1 × $128.04 -
×
Insize 5022, 2-PIECE MEASURING TOOL SET, 6928640321290
1 × $206.22 -
×
Insize 3101-100E, DIGITAL OUTSIDE MICROMETER, IP65, 3-4"/75-100mm, 6928640326813
1 × $311.93
-
×
3M 60230, Scotch-Brite Hookit Cut and Polish Disc, CP-HA, A/O Medium, 5 in x NH, 7000121099
40 × $4.57 -
×
Norton 66252843323 - 4 -1/2" X 1/8" X 5/8" Center Hub, NORZON PLUS Type 27 Depressed Center Cut Off And Grinding Wheel, 10 Each
10 × $10.68 -
×
Insize 6318, CALIPER/MICROMETER GRINDING MACHINE (caliper grinding blocks are included), 6940561953862
1 × $3,744.91
-
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63
-
×
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
24 × $3.79 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
3M 08027, Marine Grade Silicone Sealant, White, 304 mL Cartridge, 7000120476, 12/Case
12 × $38.10 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.62 -
×
Insize 3101-200E, DIGITAL OUTSIDE MICROMETER, IP65, 7-8"/175-200mm, 6928640326851
1 × $461.83
-
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.60 -
×
3M 37301, Versaflo Painter`s Hood Assembly with Inner Shroud & Premium Head Suspension S-757, 7000052768, 1 EA/Case
1 × $112.15 -
×
3M 16582, Accuspray Atomizing Head, Blue, 1.2 mm, 7010363219
10 × $10.67 -
×
Insize 4808, WIRE GAGE, 0-36(.3249~.0050"), 6928640330155
1 × $33.19
-
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $811.46
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
Related products
