-
×
3M 42818, Electrically Conductive Double-Sided Tape 5113DFT-50, Grey, 210 mm x 10 m, 4 Rolls/Case, Sample, 7100313597
1 × $178.09 -
×
Dynabrade 97103 3/8"-24 Female, 1/2"-20 Male, 2" Length
1 × $151.00 -
×
3M 51033, Roloc Disc 361F, 36 YF-weight, TSM, 3 in, Die RS300VM, 7000148150
200 × $1.55 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
Insize 1185-150A, DIGITAL OUTSIDE POINT CALIPER, 0-6"/0-150mm, 6928640302350
1 × $178.49
-
×
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
200 × $1.68 -
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21
-
×
Insize 0130-L110, LIGHT METER (BASIC TYPE), 6974029776564
2 × $65.70
-
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $25.96 -
×
3M 33439, Cubitron II File Belt, 33439, 60+, 10 mm x 330 mm (3/8 in x 13 in), 7100033194, 10 belts per carton, 5 cartons per case
50 × $24.66 -
×
3M 26109, PPS Series 2.0 Adapter, Type S23, 1/4 Female, 18 Thread NPS, 7100135941
4 × $25.96 -
×
3M 28864, Finesse-it Knit II Buffing Pad, 28864, 7 in, 1/2 in Pile Height, 10 ea/Case, 7100081911
10 × $13.42
-
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $25.96 -
×
Insize 1121-200A, DIGITAL INSIDE POINT CALIPER, 1-8"/25-200mm, 6928640302268
1 × $296.34
-
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $19.92 -
×
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
1 × $811.46
3M 67050, E-A-R One Touch Pro Adapter Plate 391-0010, 7100077665
$38.18
Factory Stock, 7-10 Day Leadtime
The 3M One Touch Pro adapter mounting backplate allows the dispenser to be wall hung using the same mounting hole locations as other dispensers on the market, such as the Howard Leight LS 500
3M One Touch?Pro Adapter Plate gives workplaces the option to switch out another dispenser, and use the same mounting hole locations when replacing it with the?3M One Touch Pro Dispenser. This accessory eliminates the need to drill new holes to mount the?3M One Touch Pro dispenser. It should be noted that this plate is not needed to wall mount a?3M One Touch Pro Dispenser in a new location, only where it is replacing an existing dispenser with a different hole configuration.
