-
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.29 -
×
3M 08301, Ultrapro Autobody Sealant, 08301, Tan, 5 oz Tube, 7100142901, 6 per case
6 × $25.60 -
×
ACS Diamond Cloth Belt, CX1250 1/4" X 24" 75U
24 × $3.80 -
×
3M 10120, Synthetic Steel Wool Pads, 10120NA, #000 Extra Fine, 7000126149
18 × $2.69 -
×
Dynabrade 78590 3/8" Dia. x 1" W x 1/8" Center Hole, 60 Grit, 100/pack
100 × $0.55 -
×
3M 77512, Cloth Belt 777F, 60 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010307736, 200 per case
200 × $5.24 -
×
Dynabrade 78582 1/4" Dia. x 1" W x 1/8" Center Hole, 180 Grit, 100/pack
100 × $0.49
-
×
3M 07414, Hand Sanding Metal Finishing Pad 7414NA, 4.375 in x 11 in, Maroon Medium, 7010315820
10 × $1.77 -
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $485.96 -
×
Standard Abrasives 882115, A/O Unitized Wheel, 821, 2 in x 1/2 in x 1/4 in, 7010310376
10 × $10.65 -
×
Dynabrade 78592 3/8" Dia. x 1" W x 1/8" Center Hole, 120 Grit, 100/pack
100 × $0.55
-
×
Norton 66254489957 Wheel, Vortex-7am, 6" X 1/2" X 1" C2312 Nor VTME7 PH VTC+, 4 Each
4 × $84.19 -
×
Standard Abrasives 717639, Aluminum Oxide Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 50, 7100115215
50 × $0.95 -
×
Dynabrade 78601 3/8" Dia. x 2" W x 1/8" Center Hole, 180 Grit, 100/pack
100 × $0.78
-
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.80 -
×
Dynabrade 78580 1/4" Dia. x 1" W x 1/8" Center Hole, 80 Grit, 100/pack
100 × $0.49
-
×
3M 06524, Scotch Steel Gray Masking Paper, 06524, 24 in x 1000 ft, 1 per case, 7000045442
1 × $183.24 -
×
3M 19076, E-A-R Classic Probed Test Plugs 393-2003-50, 50 EA/Case, 7000052882
1 × $103.04 -
×
Standard Abrasives 42623, A/O Flap Wheel 621408, 1 in x 1 in x 1/4-20 in 120, 7100053407, 10 per case
10 × $6.69 -
×
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
12 × $17.52
3M 07934, Floor Surfacing Rolls, 8 in x 50 yd, 24 Grit, 7010320729
$321.59
Factory Stock, 7-10 Day Leadtime
3M Resinite Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
