-
×
Dynabrade 77775 5" Dia. x 7/8" Center Hole, 120 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
10 × $65.30 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.80 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $634.00 -
×
3M 35829, Hookit Dust Extraction Flexible Sanding Block Kit, 7100259119
10 × $100.94 -
×
3M™ 72013, Adapter 529-04-50, 110-120 VAC, 7000131705, 1 EA/Case
1 × $135.79 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.67 -
×
3M 94706, Cubitron ll Cloth Belt 947A, 1/2 in x 24 in, 60+ X-weight, 7010307699, 200 per case
200 × $2.74 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.85 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.38 -
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $25.72 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.69 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.62 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $19.92 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $87.56 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.75 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.29
3M 06875, Floor Surfacing Rolls, 8 in x 25 yd, 20 grit, 7010401383
$174.05
Factory Stock, 7-10 Day Leadtime
3M Resinite Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
Non-Woven Discs
Standard Abrasives 882173, A/O Unitized Wheel, 821, 6 in x 1/4 in x 1/2 in, 7010330323
$40.31
Non-Woven Discs
Standard Abrasives 891133, A/O Unitized Wheel, 911, 3 in x 1/8 in x 1/4 in, 7010368297
$11.74