-
×
3M 54145, Full Facepiece Reusable Respirator 6700 Small, 7000002029, 4 EA/Case
1 × $716.91 -
×
Standard Abrasives 850034, Unitized Wheel Steel Screw Mandrel, 7/8 in x 1/4 in Shank, 7000121879
1 × $8.53 -
×
Dynabrade 78586 1/4" Dia. x 1-1/2" W x 1/8" Center Hole, 180 Grit, 100/pack
100 × $0.58 -
×
Insize 6140, DEPTH BASE ATTACHMENT, suitable for calipers with beam width (w) .630", 6928640303579
1 × $24.78 -
×
Dynabrade 91164 3/8" W x 13" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.71 -
×
3M 10115, Synthetic Steel Wool Pads, #3 Coarse, 7000051986
18 × $2.69 -
×
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
1 × $66.86
-
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $83.00 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.67 -
×
Insize 6318, CALIPER/MICROMETER GRINDING MACHINE (caliper grinding blocks are included), 6940561953862
1 × $3,744.91
-
×
3M 00705, Interam Stainless Steel Foil Tape T-65, 4 in x 100 ft, 7100024280
144 × $196.03 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 7494, 922, Disc Pad Holder 922, 2 in x 1/4 in Shank, 7000045864
10 × $7.23 -
×
3M 06524, Scotch Steel Gray Masking Paper, 06524, 24 in x 1000 ft, 1 per case, 7000045442
1 × $183.24 -
×
3M 10120, Synthetic Steel Wool Pads, 10120NA, #000 Extra Fine, 7000126149
18 × $2.69 -
×
Insize 0010-A35, SOUND LEVEL METER, 35dB~130dB, 6974029777004
1 × $170.80
-
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 92206 1/8" W x 12" L 80 Grit A/O DynaCut Belt , 50/pack
50 × $1.92
-
×
Insize 7341-8S, PIN GAGE HANDLE (with 1pc handle and 4 pairs of collecting bushes), .406-.465", 6928640370632
1 × $44.02
-
×
Insize 6300, MICROMETER STAND, 6928640307294
1 × $51.04
-
×
3M 65749, Detector Loop Sealant 5000, 1 Liter, 3M 7000056794, 12 per case
12 × $61.04 -
×
Insize 7341-7S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .341-.406", 6928640370625
1 × $46.70
Insize 7341-4S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes),.180-.228″, 6928640360732
$39.25
Wrench is needed to install pins.
Clamping bushes (.008-.281″) are made of brass, clamping bushes (.281-1.010″) are made of aluminum.
Related products
Measuring/ Inspection Instruments
$39.77
Measuring/ Inspection Instruments
$64.73
Measuring/ Inspection Instruments
$33.36
Measuring/ Inspection Instruments
Insize 4209-1, LONG HANDLE TELESCOPING GAGE, 5/16 ~ 1/2″, 6928640311536
$14.30