Sensitivity .00024in/ft (=0.001?)
No need to set zero before use.
V-groove on bottom for shafts (shafts diameter .76~4.56″).
With longitudinal vial.
Related products
$12.69
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
3M 47088, Cubitron II Stikit Film Disc 775L, 240+, 6 in x NH, Linered w/Tab, Die 600Z, 7100145372, 250 per case
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
3M 26116, PPS Series 2.0 Adapter, Type S25, 1/4 Female, 19 Thread BSP, 7100135957
3M 17534 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 2-1/2 in x 60 in, 7010366042
Insize 6301, MICROMETER STAND, 6928640307300
3M 26015, PPS Series 2.0 Adapter, Type S8, 12 mm Male, 1.0 mm Thread, 7100135931
3M 27359, Cloth Belt 970DZ, 24 YN-weight, 25 in x 75 in, Film-lok, Single-flex, 7010361224, 2 per case
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M 88874, PSA Cloth Disc 348D, 80 X-weight, 20 in x NH, Die 2000D, 7000118884
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
3M 47088, Cubitron II Stikit Film Disc 775L, 240+, 6 in x NH, Linered w/Tab, Die 600Z, 7100145372, 250 per case
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
3M 26116, PPS Series 2.0 Adapter, Type S25, 1/4 Female, 19 Thread BSP, 7100135957
3M 17534 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 2-1/2 in x 60 in, 7010366042
Insize 6301, MICROMETER STAND, 6928640307300
3M 26015, PPS Series 2.0 Adapter, Type S8, 12 mm Male, 1.0 mm Thread, 7100135931
3M 27359, Cloth Belt 970DZ, 24 YN-weight, 25 in x 75 in, Film-lok, Single-flex, 7010361224, 2 per case
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M 88874, PSA Cloth Disc 348D, 80 X-weight, 20 in x NH, Die 2000D, 7000118884
Sensitivity .00024in/ft (=0.001?)
No need to set zero before use.
V-groove on bottom for shafts (shafts diameter .76~4.56″).
With longitudinal vial.
