-
×
Insize 3232-4, BLADE MICROMETER, 3-4", 6928640327629
1 × $295.47 -
×
Insize 8911-5GM1, WEIGHT _5g, 6940561907186
1 × $14.07
-
×
Insize 3227-E065, THREE POINTS INTERNAL MICROMETER, .5-.65", 6928640328923
1 × $394.25
-
×
Insize 1145-25A, MINI DIGITAL DEPTH GAGE, 0-1"/0-25mm, 6928640303470
1 × $106.58
-
×
Insize 4168-8E, STEEL STANDARD BALLS, 5/16", 6940561981469
1 × $13.52
-
×
3M 50730, PPS UV Standard Lid & Liner Kit, Standard (22 fl oz, 650
mL), 125 Micron Filters, 7100067511
1 × $171.03 -
×
Insize 3241-B4, DEPTH MICROMETER, 0-4", base 2.480_.669", 6928640326776
1 × $182.83
-
×
Insize 0120-IM24, INDUCTIVE MOISTURE METER, 0~100%, 6974029776588
1 × $207.68
-
×
Insize ISH-DS-STANDA, TEST STAND FOR DIGITAL SHORE DUROMETER, 6940561911503
1 × $1,770.11
-
×
Insize 4810-55, CENTER GAGE, 55?, 6928640319310
1 × $7.35
-
×
Insize 1251-1500E, VERNIER HEIGHT GAGE, 0-60"/0-1500mm, 6928640363177
1 × $2,070.88
-
×
Insize HDT-A610-U, AUTOMATIC DIGITAL ROCKWELL AND SUPERFICIAL ROCKWELL HARDNESS TESTER, 6940561976649
1 × $19,799.23
-
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21
-
×
Insize 0213-A500, INFRARED THERMOMETER, -58?F~716?F/-50?C~380?C, 6940561934700
1 × $79.29
-
×
Insize 4812-12, THREAD GAGE, 2-12mm, 6928640319327
1 × $29.29
-
×
Insize ISH-RSR500-U, AUTOMATIC DIGITAL ROCKWELL HARDNESS TESTER, 6928640382185
1 × $12,180.00
-
×
Dynabrade 97566 1/4" Safety Coupler, Female
1 × $18.77 -
×
Insize 2435-E1607, BORE GAGES, measuring depth 100", range 4.0-6.3", 6940561979848
1 × $10,228.90
-
×
Insize 3203-5A, OUTSIDE MICROMETER, 4-5", 6928640304255
1 × $75.04
-
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $38.92
Insize 3532-100E, DIGITAL BLADE MICROMETER, 3-4″/75-100mm, 6928640355707
$672.39
Resolution .00005″/0.001mm.
Measure the groove diameter of shafts and keyways.
Non-rotating spindle.
Button function: on/off, set, inch/mm, ABS/INC
Data output. LR44 battery, automatic power off.
Ratchet stop.
Supplied with setting standards (except 0-1″/0-25mm).
