-
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Insize 1535-100WL, DIGITAL OUTSIDE GROOVE CALIPER, 0-4"/0-100mm, built-in wireless, 6940561961102
1 × $350.92 -
×
Insize HDT-VD100A-U, DIGITAL VICKERS HARDNESS TESTER, 6974029777967
1 × $23,702.18
-
×
Insize 4908-100, MINI LEVEL, 3.9", 6928640324994
1 × $379.06
-
×
Insize 3263-2, SHEET METAL MICROMETER, 0-2", type A, 6928640328480
1 × $709.64
-
×
3M 27313, Ultra Durable 5 inch Power Sanding Discs, Universal Hole, 60 grit, 7100187645, 10 per pack
12 × $7.95
-
×
Dynabrade 97570 1/2" NPT Female Safety Coupler
1 × $36.69 -
×
3M 14111, Cushion-Mount Pro Plate Mounting Tape with Comply Adhesive System 21320, Yellow, 18 in x 25 yd, 20 mil, 7100160399
1 × $737.91
-
×
Insize 4002-A5, ANGLE GAGE BLOCK, 5?, 6928640354175
1 × $414.18
-
×
Insize 3127-4, ELECTRONIC THREE POINTS INTERNAL MICROMETER, 3-4mm/0.12-0.16", 6928640309311
1 × $954.86
-
×
Insize 6311-9, MICROMETER SETTING STANDARD, 9", 6928640350641
1 × $23.57
-
×
Insize 4636-3C19, BSPT TAPER THREAD RING GAGE_3/8 - 19 BSPT, 6928640375071
1 × $1,522.40
-
×
Insize 0120-IM24, INDUCTIVE MOISTURE METER, 0~100%, 6974029776588
2 × $207.68
-
×
3M 95380, Water Contact Indicator Tape 5557 White, 4 in x 10 yds, 1/Case, 7000050152
1 × $34.82
-
×
Insize ISF-F10, FORCE GAGE, 10N/1kgf, 6928640348723
1 × $279.49
-
×
Insize 3332-4, INDICATING MICROMETER, 3-4", 6940561971460
1 × $840.48
-
×
Dynabrade 98272 1/2" NPT Female Plug
1 × $22.35 -
×
Insize 4168-14E, STEEL STANDARD BALLS, 1/2", 6940561981520
1 × $20.19
-
×
3M 26173, PPS Series 2.0 12-Pack Refill Kit, Standard (22 fl oz, 650mL), 200 Micron Filter, 7100166278
2 × $33.59 -
×
Insize 4645-1G11, WHITWORTH PIPE THREAD PLUG GAGE(G SERIES), G 1.1/4 - 11_ GO and NOGO, 6928640375309
1 × $393.38
-
×
Insize 2397-25A, ZERO SETTER, height 2", 6928640359545
1 × $343.13
-
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
3M 01003, Scotch-Weld EPX Mixing Nozzle, Square Green, 48.5mL and 50mL, 7100148765
1200 × $2.11 -
×
Insize 6311-27, MICROMETER SETTING STANDARD, 27", 6928640351075
1 × $103.98
-
×
Insize 4112-CD8, INDIVIDUAL STEEL GAGE BLOCK, .8", grade AS-2, 6928640353697
1 × $25.99
-
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63
Insize 3290-143, V-ANVIL MICROMETER, .8-1.4″, 6928640328039
$336.19
Graduation .0001″.
Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 or 5 flutes.
Ratchet stop.
Carbide measuring faces.
Supplied with setting standards
Related products
Measuring/ Inspection Instruments
$110.63