-
×
Insize ISR-LS605E, SURFACE ROUGHNESS REFERENCE SPECIMENS, 63.0_in, 6940561934823
1 × $267.85 -
×
Insize 1184-200, DIGITAL CALIPERS WITH ONE DIRECTION UPPER JAWS, 0-8"/0-200mm, jaw with same height , 6940561947960
1 × $232.22
-
×
Insize 2127-10, DIGITAL BORE GAGE (setting ring is not included), 6-10", 6974029771620
1 × $476.76
-
×
Insize 7350-E10, ANVIL FOR BORE GAGES, 6928640357343
2 × $36.48
-
×
Insize 4180-2000, MAGNALIUM STRAIGHT EDGE, length 80", 6928640320576
1 × $1,714.76
-
×
Insize 9331-40, DIGITAL ANEMOMETER, Measuring range .9~67.2mil/h, 1.3~98.5ft/s, 78~5900ft/m, .8~30m/s, 1.4~108km/h, .8~58.3knots, 6928640385902
1 × $157.05
-
×
Insize IST-1W30A, DIGITAL ANGLE TORQUE WRENCH, 53.1~265.5in.lb/4.42 ~ 22.12ft.lb, 6928640326318
1 × $844.30
-
×
Insize 3532-175A, ELECTRONIC BLADE MICROMETER, 150-175mm/6-7", 0.001mm/.00005", type A, 6940561956252
1 × $687.98
-
×
Insize 9631-130, VICKERS HARDNESS MEASURING SYSTEM, 1/2" CMOS, 6928640384943
1 × $3,839.12
-
×
Insize ISY-700-90024, SQUARE SUPPORT, 6940561980820
1 × $34.06
-
×
Insize ISY-100-1301, CLIP, 2PCS, 6940561936216
1 × $67.16
-
×
Insize ISP-A5000-PRINTER, PRINTER (only for ISP-A5000E), 6928640339561
1 × $566.75
-
×
Insize 3261-1E, CYLINDRICAL ANVIL TUBE MICROMETER, 0-1", type E, 6928640382321
1 × $97.05
-
×
Insize ISY-700-90004, CLIP STAND, 6940561980622
1 × $26.40
-
×
Insize ISR-LS607E, SURFACE ROUGHNESS REFERENCE SPECIMENS, 252.0_in, 6940561934847
1 × $457.08
-
×
Insize ISY-600-800023, CLIP STAND, 6940561980523
1 × $31.35
-
×
Insize 2426-11, SPLIT TYPE DIAL BORE GAGE, .402-453", 6928640310638
1 × $245.94
-
×
Insize 2307-1, DIAL INDICATOR, 1", lug back, 6928640312625
1 × $39.25
-
×
Insize ISM-PM-STAND, STAND FOR DIGITAL MICROSCOPE, 6928640397967
1 × $160.13
-
×
Insize ISY-700-90002, CLIP, 6940561980608
1 × $12.13
-
×
Insize 3232-75A, BLADE MICROMETER (6.5x0.75mm), 50-75mm, graduation 0.01mm, 6928640305306
1 × $277.27
-
×
Insize 1184-300A, DIGITAL CALIPERS WITH ONE DIRECTION UPPER JAWS, 0-12"/0-300mm, jaw with differentheight , 6940561954753
1 × $374.32
-
×
Insize ISR-S400-SB30, SMALL HOLE PROBE, 6928640323997
1 × $2,213.64
-
×
Insize 6902-106H, STAND FOR GRANITE SURFACE PLATE 6900-A23, 6928640370663
1 × $1,048.09
-
×
Insize 3260-3, SPHERICAL ANVIL TUBE MICROMETER, 2-3", type A, 6928640327841
1 × $139.50
-
×
Insize 7350-E07, ANVIL FOR BORE GAGES, 6928640357305
1 × $41.68
-
×
Insize 6329-BT50, TAPER PLUG GAGE, 6940561952018
1 × $285.07
-
×
Insize 9351-130, DIGITAL SOUND LEVEL METER, Measuring range 30~130dB, Resolution 0.1dB
, 6928640385926
1 × $241.19
-
×
Insize ISR-CSE320, SURFACE ROUGHNESS SPECIMEN, 8pcs per set, 6928640376610
1 × $276.41
-
×
Insize 3287-2, GROOVE MICROMETER, 1-2", 6928640327568
1 × $528.85
-
×
Insize 3290-105, V-ANVIL MICROMETER, .2-1", 6928640328046
1 × $292.00
-
×
Insize 1147-150WL, WIRELESS ELECTRONIC DEPTH GAGES WITH MOUNTING HOLES FOR EXTENSION BASE, 0-150mm/0-6", 6940561942774
1 × $205.36
Insize 3241-12, DEPTH MICROMETER, 0-12″, base 3.996_.669″, 6928640326752
$362.19
Graduation: .001″.
Micrometer head accuracy: ?.00012″.
Rod accuracy: ?[.001+.0005(L/3)]”, L is the measuring range in inch.
Rods with flat end.
Ratchet stop.
Related products
Measuring/ Inspection Instruments
$402.05
Measuring/ Inspection Instruments
$150.77
Measuring/ Inspection Instruments
Insize 3241-100, DEPTH MICROMETER, 0-100mm, graduation 0.01mm, base 101.5_17mm, 6928640303715
$181.96
Measuring/ Inspection Instruments
$551.95
Measuring/ Inspection Instruments
Insize 3241-1, DEPTH MICROMETER, 0-1″, base 3.996_.669″, 6928640326721
$118.71