Resolution: .0005″/0.01mm.
Measure edge to hole center distance.
Buttons: on/off, set, inch/mm, preset (+, -).
Automatic power off, move the digital unit to turn on power.
Battery CR2032, data output.
Made of stainless steel.
Dynabrade 92087 3" Dia. x 50 Grit Ceramic Non-Vacuum DynaCut Locking-Type Disc, 25/pack
Standard Abrasives 717639, Aluminum Oxide Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 50, 7100115215
3M 62607, Scotch-Weld Threadlocker TL42, Blue, 250 mL Bottle, 7100039192, 2/case
3M 05043, Cloth Belt 384F, 80+ XF-weight, 1/2 in x 12 in, Fabri-lok, Full-flex, 7100141435, 200 per case
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
Insize 1136-301WL, WIRELESS DIGITAL CALIPER (jaw length 100mm), 0-300mm/0-12", 0.01mm/0.0005", 6940561960808
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
Standard Abrasives 541150, Quick Change TS P.A.R.T. #10 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121722
3M 88903, PSA Cloth Disc 348D, 60 X-weight, 12 in x NH, Die 1200B, 7000118896
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
Dynabrade 92087 3" Dia. x 50 Grit Ceramic Non-Vacuum DynaCut Locking-Type Disc, 25/pack
Standard Abrasives 717639, Aluminum Oxide Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 50, 7100115215
3M 62607, Scotch-Weld Threadlocker TL42, Blue, 250 mL Bottle, 7100039192, 2/case
3M 05043, Cloth Belt 384F, 80+ XF-weight, 1/2 in x 12 in, Fabri-lok, Full-flex, 7100141435, 200 per case
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
Insize 1136-301WL, WIRELESS DIGITAL CALIPER (jaw length 100mm), 0-300mm/0-12", 0.01mm/0.0005", 6940561960808
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
Standard Abrasives 541150, Quick Change TS P.A.R.T. #10 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121722
3M 88903, PSA Cloth Disc 348D, 60 X-weight, 12 in x NH, Die 1200B, 7000118896
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
Resolution: .0005″/0.01mm.
Measure edge to hole center distance.
Buttons: on/off, set, inch/mm, preset (+, -).
Automatic power off, move the digital unit to turn on power.
Battery CR2032, data output.
Made of stainless steel.
