-
×
Dynabrade 91164 3/8" W x 13" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.60 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
12 × $23.20 -
×
3M 50010, VentureClad Insulation Jacketing Tape 1577CW-WME, White, 99 mm x 13.7 m, 7010379907
12 × $44.16 -
×
3M 75951, 663FC 1" X 30", 20u Diamond Trizact Belts, 7100210975
1 × $0.00 -
×
3M 19674, Scotch-Seal Industrial Sealant 800, Reddish Brown, 5 oz Tube, 7000000792, 36/Case
36 × $23.31 -
×
Dynabrade 78740 3/8" x 3/8"- B122 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $2.03 -
×
Standard Abrasives 840031, Quick Change Surface Conditioning FE Disc, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 7000046845, 50/case
50 × $0.84 -
×
3M 25139, Scotch-Weld Threadlocker TL43, Blue, 50 mL Bottle, 7100039222, 10/case
10 × $42.72 -
×
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
60 × $10.08 -
×
3M 17534 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 2-1/2 in x 60 in, 7010366042
10 × $46.80 -
×
3M 04297 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Very Fine, 2 in x 132 in, 7010365859
5 × $51.26 -
×
Dynabrade 18433 Collet Insert, 1/4"
1 × $28.25 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
3M 03027, Scotch General Purpose Cloth Duct Tape 393, Silver, 48 mm x 54.8 m, 12 mil, 7000048964
24 × $87.59 -
×
3M 20903, PSA Cloth Disc 348D, P240 X-weight, 2 in x NH, Die 200P, 7000118877
200 × $0.82 -
×
3M 81920, Hookit Microfinishing Film Disc 268L, 30 Mic, Type D, 5 in x NH, Die 500X, 7000118204, 500 ea/Case
500 × $1.24
3M 49389, Die-Cut Sandblast Stencil 519Y, Tan, 30 in x 10 yd, 48 mil, 1 roll per case, 7000123996
This item has been Discontinued.
3M Die-Cut Sandblast Stencil 519Y features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides heightened visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.
Offers Excellent Blast Resistance and High Adhesion to Stone
Ideal for die-cutting, flatbed and friction fed formats, 3M Die-Cut Sandblast Stencil 519Y helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Recommended Applications
- Protects granite, marble, wood and other stone surfaces during sandblasting operation
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil?s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
